S5 pro bundle with 7.03 will not update to 7.04

[kayakbabe 12]

I normally use the S5 to update itself. 

I have the newer model with the U on the side.

My previous updates have all been through the S5. I've never done one via USB, so I assume that the S5 would have the correct version of the firmware for 7.03.

Logging into Cura today, Cura told me there was a firmware update for the S5. 

On the S5, I used the maintenance menu to get the update. I pressed to install, then an error saying the version I had on my machine was unexpected. 

 

So.. what to do? I see the update just was released yesterday at 10am. Do I need to wait a period of time for the server to fully get the correct information so that my S5 can be updated?

 

[Smithy 1,144]

Reboot your S5 and try it again. I am not sure if it helps, but a clean reboot is always a good start before a firmware upgrade.

[kayakbabe 12]

Slap me in the face with a wet fish!

 

Reboot worked.

 

Thanks 🙂

[Smithy 1,144]

Hehe, I'm glad it was successful.

You are welcome!