Anders Olsson 136
Thank you for your efforts comparing the printers opit78!
I would say that your last Ultimaker robot is about as good as it gets with the UM2.
For my projects, the print quality of my UM2 has been significantly better than what I really need, but it is still interesting to see that the Flashforge obviously can perform even better.
Do you get the same printing times for a certain object in both printers? (if you print at the same speed, layer height, wall thickness and infill level)
I was thinking, the light weight head of the UM2 is one of the marketing points, but is the Flashforge significantly slower at infill at narrow sections? For example if you print the torque wrench housing with 100% infill and 0.8 mm walls: https://www.youmagine.com/designs/nozzle-torque-wrench
A dual extrusion test would also be highly interesting, as I mentioned before.
Recommended Posts
opit78 0
You mean fan duct ?
You can find it here https://www.youmagine.com/designs/fan-base-um2
Link to post
Share on other sites