Jump to content

Dinosaur


bwheatland

Recommended Posts

Hello everyone!

So for the past week I've been prepping one of my sculptures for 3D printing. The only thing preventing me from doing so is a lack of a 3d printer. That's why I have come to you guys to seek your assistance.

I have made the head mount for my dinosaur one single part. I have also hollowed it out and took the poly count down as much as I could in Zbrush.

I'm looking to have this guy printed as big as possible as a single part.

Once the 3D print is done I'm shipping this guy off to be painted. I'm hoping I'll have the completed product before I leave for college in about a month.

I of course will pay for shipping costs and filament expenses.

Here is a screenshot of the print in Cura.

D0eXCu.png

If you could please lend me a hand in bringing this guy to the physical world, I would greatly appreciate it.

If any of you are interested in collaborating with me just shoot me an email at bailey95@frontier.com.

Or you can just send me a private message on here instead.

Hope this interests you guys!

 

  • Link to post
    Share on other sites

    I doubt if you will ever be able to make a satisfactory print of this on a Ultimaker (or any FFD printer), Maybe something for a monthly challenge :wink:

     

    My thoughts exactly.

     

  • Link to post
    Share on other sites

    I figured that might be a problem. What approach do you think would make it easier to print? Like split it up into parts or add supports? Let me know of anyone has any ideas because I would gladly apply them.

  • Link to post
    Share on other sites

    If you want a lot of details I think you're going to have to split it I think. Any support will leave some damage after removal. Perhaps you should take a look at https://www.ultimaker.com/blogs/news/2014/07/02/3d-printed-lightsaber-design-philosophy. Might give you some ideas on how to split this.

     

  • Link to post
    Share on other sites

    My first guess would be right down the middle between the eyes. The teeth still would need support but that would be on the inside of the mouth. But even with that it looks like an extremely difficult print using FFD technology.

     

  • Link to post
    Share on other sites

    A different orientation and custom support could also do a lot.

    If you can add it, you should look in the organic meshmixer support that some people have used.

    And whats up with the huge raft / footprint?

     

  • Link to post
    Share on other sites

    Sander: I suspect it's going to be a bust, so this'll serve to hang it on the wall.

    You know, as in "I killed this beastie and kept the head" :)

     

  • Link to post
    Share on other sites

    It would also take forever to print this especially if you want to paint it straight out of the printer. with all that detail you wouldn't want much cleanup work after printing before you paint it. otherwise you will be sitting there sanding until your graduation day, unless you vapour polish. if you vapour polish then you might loose some of those small details like the small spikes on its nose.

    You may want to find a new piece to hang on your wall. maybe a cute waving octopus?? :-P

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...