cor3ys
-
Posts
241 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by cor3ys
-
-
@nallath I can send the files to you in a direct message,
The file can not be shared in public as it is a design for my business i run...
-
Cura 3.2 & 3.2.1 is crashing trying to slice dual prints
I installed 3.1 and all is fine...
Picture and cura log attached...
-
3D Prints section looks a bit of a mess...
-
I use VCL player as someone suggested on here, go to open network stream and put in the address http://xxx.xxx.x.xxx:8080/?action=stream then you can record the stream.. if you do a search there is better instructions on here somewhere..
-
I use E3D Scaffold material for support with Fillamentum PLA
-
cool prints
when you say scafolding material... is that normal PVA Support material or something else ?
Thank you.
Ian
Hi @ian
It is made by E3D, it is PVA/PVOH-based but easy to print with low viscosity
You can read more about it here http://e3d-online.com/Scaffold-Support-Material
-
Ok last update, Did a print using E3D scaffold material and all turned out ok...
.
.
-
4
-
-
I have this issue on my UM2 but not the UM2+ both use the same SD card manufacture, but i now have the UM2 rigged up to Octoprint and now i do not get the error at all....
-
Couple more prints dual colour before moving on to some PVA this weekend
-
3
-
-
Hi @Cor3ys,
I was wondering how it was going with your Ultimaker 3.
Your prints look really great!
Did you already get a reply from your reseller?
Hi @SandervG
I just got an email from them saying Ultimaker has told them to offer me a spool of filament is that correct a spool of filament for a cosmetically damaged £3000 printer ?
I would at least expect a complementary core ;-)
-
Yeh i contacted reseller but seems to have fallen on deaf ears, funny thing is the day before when they was selling it to me they were very quick in there responses to my question's...
Will contact them Monday again if not the manufacture will have to sort it....
-
Hi Guys
Not been around since the forum upgrade I see there is still issues but anyway thought i make a post about my Ultimaker 3 For the last 6 months i have started a hobby/business (vapes3d.co.uk) printing vape stands and i have been designing simple dual color prints using the pause method for, but now i should be able to get more creative with the UM3
Here it is sitting in-between a couple of my other printers for now the other side of the room has my UM original so i have the whole family and a BigBox...
All packaging look fine no external damage and internally everything was fine and in its correct place, once i got the printer out of the box to give it a good looking over all was fine, all the rods were nice and tight nothing was lose like i had experienced before. then i could see some internal damage on the inside of the printer that looks like a production quality issue, where the assembler has scratched the inside of frame while fitting the motor cover on the left back.
For a £3000 + printer that is not cool how this got past quality control i don't know ? @SandervG
(update issue above resolved)
That aside the setup process was straight forward and simple and taking in and out of the cores is quite easy no issues there, wifi was all good and talked to cura just fine....
I am halfway through a dual print a simple spiral cone just to see the results before moving on to bigger things which i will post here when finished...
Edit: Just noticed that the wire from the top left limit switch is rubbing against the belt from the motor so will need moving when the print is finished....
-
-
No sorry, hotbed sells with the printer...
-
Hi Guys
Selling my Ultimaker Original 3D Printer Plus HotBed Upgrade And Ulticontroller Just listed it on Ebay but if anyone here would like it you can have it for £500, Cash on collection...
I have had the printer for a couple of years now, i have installed the Ultimaker hotbed upgrade kit worth £260 I have the original bed to include with the sale. I have also added an additional fan to the hot end for better cooling of the prints. And it also comes with the extruder drive upgrade and the Ulticontroller.
Reason for sale is i have 4 printers and running out of space so one has to go.
I can also throw in some filament PLA & ABS if required to get you started.
-
Hi
what file/settings do i need to change so i can set RETRACTION SPEED to 70mm/s currently limited to 25 for a custom machine setup
Using a BigBox printer with titan feeder, 60-70mm/s for these printers is stranded..
Looking through the file (fdmprinter.def.json) maximum is defined as (machine_max_feedrate_e) now i am stuck
-
Page 33 is showing on the overview page and when you click on that it takes you to a blank page 33... but when you click on page 32 it works so i assume this post will end up on page 33 now
Edit: so yes this is now top of page 33 so the overview screen is reporting the next page before there is any post actually on the next page...
-
1
-
-
@sandervG sent, its not taking me to page 33 it takes me to page 34...
-
-
@sandervG I just clicked on a notification for this thread and it took me to a blank page, page 33
-
1
-
-
I just won 2x Business Conference passes direct from the 3D print show guys for Thursday will anyone be going ? or you all Saturday people ?
-
also, lack of spelling checker. i am very dissabled when it comes to writing, and it makes me extreamly uncomfortable that i am unable to use my browsers spell check function with this forum. while this community is likely 102% forgiving, too much bad history on other forums.
spell check working here using firefox....
-
Have you checked the pulleys are tight on the shafts ? are the short belts nice and tight (motor's not lose) ?
Are the limit switches actually being activated when the head is in the home position ? you should here them click if you move the head by hand to the home position ?
-
1
-
-
Hi KPK
Yes make sure you have the latest version of Cura and then plug in your printer to the computer and update the firmware using Cura..
Cura 3.2 & 3.2.1 dual print crash
in UltiMaker Cura
Posted
@nallath Sent you DM with Files