all metal hot end for UM3

[jetten3d 2]

when are we going to get a steel hot end for ultimaker 3?

[ultiarjan 1,223]

Why would you want that? the CORE's are real good IMHO .....

[meduza 191]

Well, if you ask me there is only one single reason to go all-metal, and that is to print with plastics in the 300C+ range, so more or less PEI and PEEK, and for those you more or less need a enclosed heated chamber to print.

For everything else... the current Core design is way better.

Edited January 30, 2017 by Guest

[gr5 2,192]

The um3 Core already goes to 350C. @jetten3d - do you need to go hotter than 350C?

[jetten3d 2]

The um3 Core already goes to 350C.  @jetten3d - do you need to go hotter than 350C?

 

i was looking for a steel hot end for UM3 that can print abrasive materials like Carbon fire

[swordriff 119]

its not the hot end as such which is worn out quickly by abrasive filaments, it is more the tip of the nozzle.

Like @ultiarjan says, the core is good!

[ultiarjan 1,223]

Yeah, like the core so much I even use it in my "GO"

https://ultimaker.com/en/community/24039-using-the-ultimaker3-core-on-an-ultimaker2?page=2&sort=#reply-171478

[gr5 2,192]

Brass is a metal but the bottom of the brass nozzle will wear out quickly if you print abrasive filaments.  You can however get a steel nozzle for UM3 cores.  Since you are in canada you should get it at my store: thegr5store.com.