I used this combination for a long time:
https://www.youmagine.com/designs/um2-feeder-on-um1
However, if you can live with the noise, I've found the original geared UMO feeder to be the best one I've ever tried.
Recommendations for a new Feeder for the UMO+
- 1 month later...
Bondtech, is a different world.
@conny_g Why? How is it noticeable?
+1 for a Bondtech QR, just works, easy to open for cleaning, hardened gears for printing abrasive filaments.
48 minutes ago, PhilDesign said:@conny_g Why? How is it noticeable?
Stronger grip due to two grip wheels, better/sharper teeth. And I remember I thought the sound was more pleasant. But that's 2 years ago or something, not completely sure about that.
I have a Bondtech QR for two days on my Um2Go, and I love it. Easy loading and perfect grip. The few test prints I did, I could not see any kind of under extrusion. So highly recommended
-
Our picks
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 20 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
Release Notes: S-Line Firmware 8.3.0 (Latest)
Dustin posted a topic in Firmware,
S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
(Sorry, was out of office when this released)
This update is for...
All UltiMaker S series
New features
Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.-
-
- 0 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
Dim3nsioneer 557
Maybe you want to check a Bondtech...
Link to post
Share on other sites