Cura 3.6.0 release Ultimaker Original+ problem with firmware update

[indefix123 0]

The firmware for the UMO+ included with the Cura 3.6.0 release does not function properly on UMO+ the problem is that the controller screen becomes illegible i.e. becomes blue. I had to load a previous firmware from an older Cura version 15.04.06 to make it work.

[Radu 0]

Same thing happened with my UMO+, I had to reinstall the firmware coming with Cura 3.5.1.

[nallath 1,123]

Uh. That's weird. As far as I know, we haven't changed the firmware for the UMO+ in quite some time.

[ahoeben 1,955]

The firmware updater has been changed though (as in: the part that flashes the firmware). Unfortunately, I don't have an UMO+ to test with.

[yori 0]

Hi,

same here. Are there any news to that issue?

 

[tinkergnome 927]

1 hour ago, yori said:

Hi,

same here. Are there any news to that issue?

 

 

 

[yori 0]

Ah, here is a lot more information about that. Thanks.

 

[peggyb 171]

Had the same issue with a UMO+, suspected the cables, changing the with another pair did work better.

Another thing I noticed, removing the SD card, then restart the printer also worked. The issue does not go away, but something works... Did the update with 15.04.6 as well as 3.4.1.