Cura3.3 cannot connect printer via USB

[TK_HPU 0]

Cura3.3 cannot connect printer via USB.

But Simplify3D can connect to the printer.

Is it the bug of Cura3.3?

Here is the log info.

WARNING - [Thread-6] UM.Logger.logException [85]: serial.serialutil.SerialException: could not open port 'COM2': PermissionError(13, '拒绝访问。', None, 5)
DEBUG - [Thread-6] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 19200 works
WARNING - [Thread-6] UM.Logger.logException [81]: Exception: Unable to create serial
WARNING - [Thread-6] UM.Logger.logException [85]: Traceback (most recent call last):
WARNING - [Thread-6] UM.Logger.logException [85]:   File "C:\Program Files\Ultimaker Cura 3.3\plugins\USBPrinting\AutoDetectBaudJob.py", line 41, in run
WARNING - [Thread-6] UM.Logger.logException [85]:     serial = Serial(str(self._serial_port), baud_rate, timeout = timeout, writeTimeout = timeout)
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialwin32.py", line 31, in __init__
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialutil.py", line 182, in __init__
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialwin32.py", line 62, in open
WARNING - [Thread-6] UM.Logger.logException [85]: serial.serialutil.SerialException: could not open port 'COM2': PermissionError(13, '拒绝访问。', None, 5)
DEBUG - [Thread-6] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 9600 works
WARNING - [Thread-6] UM.Logger.logException [81]: Exception: Unable to create serial
WARNING - [Thread-6] UM.Logger.logException [85]: Traceback (most recent call last):
WARNING - [Thread-6] UM.Logger.logException [85]:   File "C:\Program Files\Ultimaker Cura 3.3\plugins\USBPrinting\AutoDetectBaudJob.py", line 41, in run
WARNING - [Thread-6] UM.Logger.logException [85]:     serial = Serial(str(self._serial_port), baud_rate, timeout = timeout, writeTimeout = timeout)
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialwin32.py", line 31, in __init__
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialutil.py", line 182, in __init__
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialwin32.py", line 62, in open
WARNING - [Thread-6] UM.Logger.logException [85]: serial.serialutil.SerialException: could not open port 'COM2': PermissionError(13, '拒绝访问。', None, 5)
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 230400 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 57600 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 38400 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 19200 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 9600 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 115200 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 250000 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 230400 works

 

Thanks!

[ahoeben 1,953]

Ultimaker has no interest in supporting USB printing. So if it does not work you will have to use something else untill someone from the community or eg your printer manufacturer steps in and fixes it.

[LePaul 323]

I'd suggest setting up and Raspberry Pi and install Octoprint.  Then you can make use of the Octoprint plugin within Cura.

 

[chexov 0]

On 1/18/2019 at 9:36 AM, TK_HPU said:

Cura3.3 cannot connect printer via USB.

But Simplify3D can connect to the printer.

Is it the bug of Cura3.3?

Here is the log info.

WARNING - [Thread-6] UM.Logger.logException [85]: serial.serialutil.SerialException: could not open port 'COM2': PermissionError(13, '拒绝访问。', None, 5)
DEBUG - [Thread-6] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 19200 works
WARNING - [Thread-6] UM.Logger.logException [81]: Exception: Unable to create serial
WARNING - [Thread-6] UM.Logger.logException [85]: Traceback (most recent call last):
WARNING - [Thread-6] UM.Logger.logException [85]:   File "C:\Program Files\Ultimaker Cura 3.3\plugins\USBPrinting\AutoDetectBaudJob.py", line 41, in run
WARNING - [Thread-6] UM.Logger.logException [85]:     serial = Serial(str(self._serial_port), baud_rate, timeout = timeout, writeTimeout = timeout)
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialwin32.py", line 31, in __init__
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialutil.py", line 182, in __init__
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialwin32.py", line 62, in open
WARNING - [Thread-6] UM.Logger.logException [85]: serial.serialutil.SerialException: could not open port 'COM2': PermissionError(13, '拒绝访问。', None, 5)
DEBUG - [Thread-6] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 9600 works
WARNING - [Thread-6] UM.Logger.logException [81]: Exception: Unable to create serial
WARNING - [Thread-6] UM.Logger.logException [85]: Traceback (most recent call last):
WARNING - [Thread-6] UM.Logger.logException [85]:   File "C:\Program Files\Ultimaker Cura 3.3\plugins\USBPrinting\AutoDetectBaudJob.py", line 41, in run
WARNING - [Thread-6] UM.Logger.logException [85]:     serial = Serial(str(self._serial_port), baud_rate, timeout = timeout, writeTimeout = timeout)
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialwin32.py", line 31, in __init__
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialutil.py", line 182, in __init__
WARNING - [Thread-6] UM.Logger.logException [85]:   File "serial\serialwin32.py", line 62, in open
WARNING - [Thread-6] UM.Logger.logException [85]: serial.serialutil.SerialException: could not open port 'COM2': PermissionError(13, '拒绝访问。', None, 5)
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 230400 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 57600 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 38400 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 19200 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 9600 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 115200 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 250000 works
DEBUG - [Thread-3] USBPrinting.AutoDetectBaudJob.run [37]: Checking COM2 if baud rate 230400 works

 

Thanks!

 

Hey there.

According to your log file, you are having "Permission Error".

Are you connecting with S3D *AND* Cura at the same time?

Basically, a first application which opens usb port for writing will win:)