Jump to content

ER15 ultimaker 3 Extender


Mar

Recommended Posts

Posted · ER15 ultimaker 3 Extender

I have a printer ultimaker 3 Extender which has had problems especially in long impressions when it stops saying in the indicator ER15 which is something related to the temperature sensors of the print core as I understand, we try to change the print core as the page "https://ultimaker.com/en/resources/23149-heater-error-on-printcore" said but the error happened again, by checking the monitoring of the print I noticed that in a flash shot to 700 someone could help me with this thanks

ULTIMAKER.PNG

  • Link to post
    Share on other sites

    Posted · ER15 ultimaker 3 Extender

    It's probably a loose cable in the print head.  This is extremely easy to fix.  Remove the rear two screws - very long screws at the top rear of the print head.  After you pull those out the panel on top of the print head towards the rear half comes off.  Then push the cable connector down better and when you put the cover back on push the cable in a little for strain relief and also add some blue tape or other shim so the cable doesn't slide up again.

     

  • Link to post
    Share on other sites

    • 2 months later...
    Posted · ER15 ultimaker 3 Extender

     

    Hey there,

    we´ve experienced a simillar error and it occurs still and somehow randomly.

    While Printing our UM3 freezes with the ER15 error in the display. After a look at the monitoring of the print it looks simillar to your posted curve. After Contacting our local support we´ve got a solution from the Database which basically recommended changing the Printcores. But it had no effect on the occuring error. We´ve began to change the signal chain part after part ending up with changed printcores, changed Printhead PCB, changed wiring harnes from Printhed to Motherboard as well as numerous updates to the latest UM3 Firmwares. But still the error occurs randomly. The last possible thing would be to change the Motherboard but is it really nessecary? Is ther no direct support from Ultimaker for problems which are not soluable by the solution Database or the knowledgesources on the website etc.?

    Hope you can help me, thank you in advance.

  • Link to post
    Share on other sites

    • 4 months later...
    Posted · ER15 ultimaker 3 Extender

    When I had such issue with Er 15 printhead disassembly fixed it. I disassembled printhead, removed and cleaned printhead PCB board and assembled everything back. First of all I tried to reconnect rear printhead cable but nothing hapened. 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...