Cura 4.1 raise temperature up to 235°

[Peter57 0]

Hi there !

Cura 4.1 raise extruder temp up to 235° at the end of printing.

Here at layer 32 :

M104 S235.000000 T0

The temp is normaly at 220° (PLA).

what's going on ?

Regards.

Peter

AU30_Bouton Cuedo v4.gcode

[burtoogle 514]

It's probably been affected by the change-at-z script that has been diddling with your gcode...

;LAYER:32
G1 F2700 E528.58937
;MESH:Object 1
G0 F7200 X110.319 Y109.188 Z5
;ChangeAtZ V5.1.1: executed at 5.00 mm
M117 Printing... ch@  5.0
M104 S235.000000 T0

 

[Peter57 0]

It's not a Cura 4.1 bug. I get the same result with Cura 3.6 at the sale layer.

M104 S235.000000 T0
I Can't figure out what's going on ???

[gr5 2,206]

Instead of posting the gcode file, could you post the 3mf file?  In cura do "file" "save" and it will save everything - your printer settings, your profile settings, your model, where you positioned the model, everything.

[Peter57 0]

OK gr5.

here is the .stl file.

Button v4.stl

[burtoogle 514]

Err, no, try again, we want to see the .3mf file. Do File -> Save from within Cura so that it will save the model and the settings into a Cura project file.

[Peter57 0]

Sorry ! tough day !!!AU30_Button v4.3mf

 

[burtoogle 514]

OK, thanks for the project file. I sliced that and the only temperature setting commands set 220 at the start of the print and 0 at the end. There's no change-at-z script as far as I can see. Dunno, looks fine to me.

[Peter57 0]

yes burtoogle!

BUT…. the temp does raise at 235° Celsius and ruins my piece !!!

 

 

 

[Peter57 0]

Burtoogle, Thank you !!!!!!

I've found the bug ! 

There was actually a postprocessing code that changed the temp.

Peter

[burtoogle 514]

Good, glad you have sorted it out. Cheers!