Try lowering be the support join distance and the support horizontal expansion.
-
1
Try lowering be the support join distance and the support horizontal expansion.
how do you control where the supports are placed? It's so difficult to remove them and I feel that I can minimize them using Tree supports. Im new to 3d printing, but my hands are all cut up and I have had to throw away too many projects from damaging them removing supports.
To my expirience so far, using 1 line wall support seems to be easy enough to remove. Im new to this too though and I don't know if this is enough for bigger prints or if are there any other options.
Recommended Posts
gr5 2,224
If you turn the right side in this image to be down you might not need any support. Not sure - I need to see the part better from all angles.
I usually just create my own custom support in CAD if cura doesn't figure it out right away but there are tons of settings you can play with - maybe the x/y wall distance is the one you want?
Link to post
Share on other sites