Hi,
This is an "adapter SD card" for using "micro SD" into a standard SD slot.
What printer do you have?
Thanks
Torgeir
GregValiant 1,317
If the card is inserted after the printer has been turned on, then it may have to be "Initialized". There should be an option for that in the LCD menu.
You may want to try inserting the card and then turning the printer on.
Another thing to try is to reformat the memory card to FAT32.
Some 3d printers do not read cards over 32mb.
Some machines do not read file names over 16 characters so keep file names on the memory card short.
-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
fvrmr 73
Do you see this on your printer or in Cura?
Link to post
Share on other sites