STL File of the #2137 Clamp Clip

[Erick_98 0]

Hi! Does anyone has an sTL file of this part? Is the #2137 CLAMP CLIP. Thanks!

 

[Enigma_M4 120]

Hi,

not exactly, but there are a lot of versions online at Youmagine or Thingiverse.

For example:

https://www.youmagine.com/designs/easy-clips-for-ultimaker

https://www.youmagine.com/designs/ultimaker2-bowden-cable-clip

https://www.youmagine.com/designs/ultimaker-2-bowden-clip

https://www.youmagine.com/designs/ultimaker-bowden-holder-clip

Regards

 

[tinkergnome 927]

8 hours ago, Erick_98 said:

Hi! Does anyone has an sTL file of this part? Is the #2137 CLAMP CLIP. Thanks!

 

Well, the step file is published on GitHub:

 

https://github.com/Ultimaker/Ultimaker3/tree/master/2137/2137-A

 

 

If you want exactly this part - just convert it to stl format. A convenient way is:

https://www.opencascade.com/products/cad-assistant/

 

2137-A.stl

[GobelinAstucieux 1]

This older post shows up quite high on Google when looking for UltiMaker 2137 Bowden tube clips.

Here is a new file on Thingiverse that contains 2137 clips of different thicknesses.

They are particularly useful if using generic PTFE Bowden tubes or if your tubes are loosening with time. They also seem to work well with OEM tubes.

https://www.thingiverse.com/thing:6490666

[gr5 2,189]

Very nice.  If you design your clip with openScad then it's easy to make your model "customizable" on thingiverse such that people can type in any thickness of the clips they want.  But still, this should be helpful to someone as I think you covered all the likely needed sizes, lol.