Move material

[punpunm 2]

Have any one try move material function?

It doesn't work with cura 14.01

I change the PLA, but it won't come out, so I try to move the material, then I find this bug.

[gr5 2,247]

I tried it on 14.01 and it worked fine for me.

 

[woofy 12]

I've run into this again today. I've been struggling with extrusion issues, so I've been using Move Material a lot. It suddenly stopped working, the stepper not rotating or making its normal stepping sound. The only way to fix it was to re-boot the printer. I don't know how to trigger the issue though, its only happened a couple of times.

 

[Daid 306]

It happens after a print is done, or more specificly, it refuses to do the move-material when the last action the printer did was a homing action.

It's a bug, and I have a fix ready and waiting.

 

[tonycstech 5]

What is move material function ?

 

[geeks 1]

I found an intermediate solution!

 

I print a small square of my design. The goal is to make extruded. Print does not take more than 15 minutes.

 

https://www.youmagine.com/designs/square-cleaner-nozzle

 

I tested several times and it works perfectly