U2 not starting the print in the center of the buildplate

[shikhar.df3d 0]

I am trying out my first print. The printer is starting in the front left corner and is trying to print where the glass clamp is. I immediately aborted the print in order to prevent any damage to the nozzle.

I checked my files for any stray parts of the model, but the files are alright.

How do I get the U2 to print in the center of the buildplate?

 

[IRobertI 520]

Are you using cura to slice the model? Did you choose "Ultimaker2" as the machine type? Did you accidentally check "Machine center 0,0" in the machine settings?

 

[gr5 2,192]

It's the machine center 0,0 thing. The center of the plate is *not* 0,0 (it's roughly 116,116). So uncheck that. You probably didn't select an ultimaker2 as your machine so you may have other issues also.

 

[shikhar.df3d 0]

Thank you guys.

Yes I am using Cura and yes I did select Ultimaker 2.

Yes I had checked the machine center box, thanks again.