I have the same problem with the Blueish White, while other ColorFabb colours are printing nicely
Here is my favourite example, where I reduce temperature by 5°C every cm:
All my filaments are doing fine down to 195°C, except the blueish white which will clog at 220/215°C...
It works OK when printed hotter, but then generates more stringing.
Recommended Posts
DidierKlein 729
I use Colorfabb filaments mainly and i don't have problems with it. Never tried the blueish white tough.
There's something odd with white filaments they seem to cause a lot of headaches...
Are you sure your nozzle is clean? Did you try another color to see if you still have the problem?
Link to post
Share on other sites