Jump to content

Paramesh

Member
 View Profile  See their activity

  • Posts

    26

  • Joined

  • Last visited

 Content Type 

Everything posted by Paramesh

  1. Paramesh
    the print core AA0.4 was stuck with material and I couldn't print anything and did not know how to fix the issue. Thanks for the post, I followed what is written in the post and got the issue resolved. 1) unloaded the wire. 2) went to print core AA menu 3) selected 3 dots on the top right corner 4) set temperature to 250C 5) waited for a minute 6) now loaded back the wire, and 7) the stuck wire came out just like that. Thanks to @gr5
  2. Paramesh
    @Smithy thank you very much, it did work
  3. Paramesh
    @SandervG, @Smithy, @Travis7s, @gr5 Hi unable to locate the Tough PLA Grey in my Cura software, could you please help me on this
  4. Paramesh
    @Carbon, i did open the link, but how to get that things into the cura software on my computer.
  5. Paramesh
    Hi All, I have UltimakerS5. did purchase a new ultimaker tough PLA Light grey spool. when opened the CURA i could not choose the light grey colour for printing as there is no such option. could someone please help me on this refer below pic of the cura
  6. Paramesh
    this is PLA Blue from Ultimaker , my bad, sorry missed typing a letter
  7. Paramesh
    print surface has small holes, is there any product that could be used to fill these holes? ( like on wallboard or any wall we fill putty, like on any sheetmetal work of automobile during manufacturing we fill silica sealant to seal the gaps/holes and make the parts surfaces look better) do we have any such product in 3D printing, to fill the holes and make the print look better. we used LA blue for printing.
  8. Paramesh
    sure smithy will take care in future, and thank you for the response actually this Monday (Today) we have sales people coming from all over the world, they come to visit the plant yearly once, and during their visit they also visit our prototype building shop wherein they would see me printing some 3D prints. that's the reason I was rushing to get answers from Ultimaker experts in last week. I just wanted everything to function normal during their visit. and hopefully it does happen Thanks
  9. Paramesh
    @UlrichC-DE could you please look into this post
  10. Paramesh
    what fans you are referring to
  11. Paramesh
    also changed the Print head, but no change
  12. Paramesh
    Someone please help me, so far I have lost atleast 11 3D prints and a big waste of time. material 1 feeding stops and the print head runs without any material, and thus the print is incomplete. the reason is shown in attached picture, the tube comes out or material flow stops,...... so far I have taken different steps to solve this 1. initially there was Tough PLA Black when this problem first seen, thought tough black has some problem, so changed to PLA blue. but on the new print also , the same problem occurred 2. checked outer tube end portion, thought may be a bit worn out, so I did cut that portion. but problem still continued 3. did reset on factory settings of the machine, but problem still continued 4. did calibration of build plate/glass, but problem still continued 5. continually monitored material flow right from easy of spool rotation, to print head, everything seems normal but still the material feeding stops as the tube comes out as shown in picture. the only thing happened since yesterday is now the feeding stops every 5 mins and things have got more worsen. Not sure what to do. Request your sincere guidance on this issue please @Smithy, @GregValiant, @SandervG, @gr5, @Philler, @RogueWave
  13. Paramesh
    got you @Smithy and @GregValiant Thank you very much for your feedback
  14. Paramesh
    HI All, I gave a 3D print on Ultimaker S5, kindly refer below pic wherein you will see that cura did not pick any supporting material, it is printing on PLA blue only. I was just wondering how to take this print out of the glass. so far, on other prints there was initial layers of PVA natural supporting material, once the 3D print is done, I would immerse the print along with glass into the water and after few hours the parts comes out easily. but in this scenario where there is no supporting material, and main PLA blue material is sticked to the glass, now I do not know how to take the part out of the glass. request some guidance on this @Smithy @SandervG @jbrownlee @GregValiant @gr5
  15. Paramesh
    Even I have this problem all the time. right now just trying to store the PVA in its original packing when not in use and trying to heat it up before start of the print. but as the print are 22 to 30 hours long duration, the PVA start behaving bad after 5 to 6 hours and then it keep on destroying the print
  16. Paramesh
    Hi All, after first success, I did 3D print the second project. started with same procedure, kept the PVA on the build plate which was set to 55 deg Celsius hot for 60 mins. total print duration was 14 hours 40 mins. PVA did perform great upto first 3 hrs and then started messing around. this project did need the PVA support up untill top edge. just because PVA was messing around, the final print finish quality is not so good. is there anybody who could help me in this regards (first getting a smooth finish on the print, and second making PVA to be good for whole print duration) Thanks in advance
  17. Paramesh
    this is a great idea and thank you so much for sharing updated STL file. a lot helpful for me to print. I will try this way and let you know where iam on this Thanks
  18. Paramesh
    the material is PLA BLUE, I scale it down to 10% I totally understand now why CURA is suggesting the PVA supports. let me see how these corner clips and handles could be done Thanks for your great input @GregValiant
  19. Paramesh
    it would be really great if someone works on the STL file and guide to me the best set-up in the cura for a perfect print and restricted PVA supports to bottom on the print only. please find attached STL file DXS 310F.STL
  20. Paramesh
    Hi All, below is the pic of the cura where I am setting up a new part to be printed. when sliced we see that thee is lot of support on vertical walls through PVA material. I just want to limit the support upon to base only, that is 10-15% from bottom, and the rest of the walls could be built without the PVA support. could someone please guide me how to do this, restrict the PVA support to bottom. PVA support not required on walls
  21. Paramesh
    I just want thank you all who wrote on this post, I could finally print my very FIRST part and it turnout to be good. I took PVA and kept on build plate at 50 celcius hot for one hour, and then it worked well. below pic is the print.
  22. Paramesh
    thank you SandervG. I did try the link and getting following error 403 FORBIDDEN You don't have permission to access this page. 2021-08-17 11:11:36 | Error 403 | https://academy.ultimaker.com/
  23. Paramesh
    you are correct I believe, I left the PVA on the printer for almost 4 weeks and trying to print now. may be that's the reason it is giving so many strings and stopping the print regularly. I shall keep the PVA warm today and try by evening or tomorrow Thanks
  24. Paramesh
    Hi I did complete the registration, where to find the courses Thanks
  25. Paramesh
×
×
  • Create New...