ColorFabb have a Black Friday deal. Buy 4 Rolls and get the 4th free.
I might buy a couple of rolls of Ngen and try out some filament they have.
ColorFabb have a Black Friday deal. Buy 4 Rolls and get the 4th free.
I might buy a couple of rolls of Ngen and try out some filament they have.
Back to the original question, Colorfabb flexible ....
I've seen it last week during a Colorfabb factory tour, the real flexible. asked when It would be available, answer; "soon, but don't expect it within a month ...."
Rats, I'm going to delay my Xmas present to my self of a sample set of the new filament until the end of January in the hope of this flexible filament, any idea the possible colour range for it Arjan?
Edited by GuestNo idea. I only saw grey... but don't think Colorfabb will leave it a that
No, they indeed won't leave it like that .......
Recommended Posts
pm_dude 27
I got only limited time to do a test but I did print a tree frog and the overhang on the belly have come out perfect with 100% fans. That being said I think 100% is too strong cause I had to raise temp to 235°C and can clearly see a difference in color from 230 to 235 when I did that. I guess fans at 50% and printing at 225°C would give a similar result.
I notice a good difference in retraction between 230 and 235 so I suspect that the retraction will be much easier to deal with around 225.
Still no burn marks
Hope to get another run around 220-225.
Link to post
Share on other sites
Dim3nsioneer 558
@pm_dude: Thanks for the news!
Link to post
Share on other sites