UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
SOLVEDUM3-Extended firmware on regular UM3 after reseller service..
I'm going to guess you will have to put it in developer mode and ssh into the machine (in dev mode it tells you the ip address). Do you know how to use ssh @rasmus? If not I can send you instructions. username is root, password is ultimaker. But I don't know what to do after that.
Posted
· UM3-Extended firmware on regular UM3 after reseller service..
Indeed the firmware is the same, there is 1 firmware for all machines. The type of machine however, is stored on internal EEPROM on the board.
The command "python3 /ulti_installer/configure_eeprom.py 9066" (or 9511 if you need an extended instead of a normal UM3) will change the machine type. Needs a reboot before it's picked up.
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
gr5 2,224
Wow! This is a great question. Maybe Erin knows. The firmware is here:
http://software.ultimaker.com/jedi/releases/
But that somehow "knows" which type of machine you have. Maybe it's a jumper or something.
@fbrc8-erin @Daid @neotko @nallath - do one of you know how to tell a UM3 that it is not an extended?
I'm going to guess you will have to put it in developer mode and ssh into the machine (in dev mode it tells you the ip address). Do you know how to use ssh @rasmus? If not I can send you instructions. username is root, password is ultimaker. But I don't know what to do after that.
Link to post
Share on other sites
Daid 306
Indeed the firmware is the same, there is 1 firmware for all machines. The type of machine however, is stored on internal EEPROM on the board.
The command "python3 /ulti_installer/configure_eeprom.py 9066" (or 9511 if you need an extended instead of a normal UM3) will change the machine type. Needs a reboot before it's picked up.
Link to post
Share on other sites
Rasmus 0
Amazing, my Ultimaker is now over its identity crisis! Thanks @gr5 and @Daid for quick replies and good instructions!
Link to post
Share on other sites