Hi everyone
Here we post our own designs for this contest. We hope you enjoy!
Please give us your kind feedbacks.
Best Regards
Ali
www.Innolabs.ir
Hi everyone
Here we post our own designs for this contest. We hope you enjoy!
Please give us your kind feedbacks.
Best Regards
Ali
www.Innolabs.ir
5 hours ago, pardis3d said:Hi everyone
Here we post our own designs for this contest. We hope you enjoy!
Please give us your kind feedbacks.
BesInnolabs.ir.zipt Regards
Ali
www.Innolabs.ir
Ok, here's some feedback. I did not llok at all models, but here's feedback on a few. Though I like the designs, the models are not set up very well if you intended to print them without support.
For example, looking at the wheels, you intended to print it without support, on it's side, but the model does not lay flat, as the tank is wider than the base of the trailer.
This trailer will have such small detail, such small islands to start on the glass-bed, that they will fail during printing.
This bus does not have the wheels optimised for 3d printing, and probably the details of the windows are to small to print.
here you have optimized the wheels for printing, but the front of the truck is not touching the buildplate, so it will not print without support
Thanks @pardis3d for your entries, and @ultiarjan has some good tips re design for 3D printing. Feel free to use it to your advantage ?
One more week to go! Curious to see what else will be submitted ?
7 minutes ago, SandervG said:One more week to go! Curious to see what else will be submitted ?
Oh man...I thought I missed this opportunity! I have been so busy playing catchup, it was the thing that fell through! Thanks for the reminder!!
5 minutes ago, kmanstudios said:Oh man...I thought I missed this opportunity! I have been so busy playing catchup, it was the thing that fell through! Thanks for the reminder!!
Looking forward seeing your submission kman! ?
OK, printing out the last of the trial designs. I would not want to upload the files to have an issue that could not be solved. I should have everything ready by Saturday. The designs are done.,...just waiting on the prints to be finished.
Hope that falls within the time frame. ?
5 hours ago, kmanstudios said:Hope that falls within the time frame. ?
You have until July 9th (Monday), so should be in time! Curious to see what you'll submit!
That gives me time to reprint one of the sets that warped a bit. Been a long time since I did not get my PLA stuck down very well. Dunno what happened there.....
Thanks!! :)
So!! Here is what you get!!
Each set has 6, count 'em! 6!! Vehicles to choose from! 3MF Files are in proper printing orientation for ease of model imports.
I do not think that is enough!! DO YOU?!??
Well, Since YOU Asked
Each Set Has been pre-rendered to make sure YOUR experience is as painless as possible!
You mean, THERE'S MORE?!?!?
Download NOW and You Get a Special Bonus File!! Hurry Now because in the NEXT 5 MINUTES YOU Get 2!! in ONE FILE!!!!
Offer Void Where Prohibited by Good Taste!! ?
UM3E_Cars_PLA-04mmNoz_01Lay.curaproject.3mf
UM3E_Vans_PLA-04mmNoz_01Lay.curaproject.3mf
UM3E_Construction-Main_PLA-04mmNoz_01Lay.curaproject.3mf
UM3E_Construction-Bins-CementMixer_PLA-04mmNoz_01Lay.curaproject.3mf
UM3E_Flintstonemobile_PLA-04mmNoz_01Lay.curaproject.3mf
It was brought to my attention that in my over nighter stupor. I did not put up STL files.
Well! Here YA GO!!!!!?
ICE CREAM!!!
yummmmmmy ?
Edited by kmanstudios
LMAO!!?
Yeah...,Just a bit punchy on the all nighter ?
@kmanstudios DAAAAAAMN!!
Hey Everyone!
I just signed up to community forum, and this is my submission!
I designed 6 different railway vehicles with various technical drawings that I've found on internet. Each one is based on a specific railway vehicle. There are:
Paris, France Siemens Avanto
Portland, USA -If I'm not mistaken- Skoda Astra Double Ended
Kuala Lumpur Putra, Malesia Bombardier Advanced Rapid Transit
Marseille, France Bombardier Flexity Outlook
New York City, USA Bombardier Former IRT Lines
Toronto, USA Bombardier
To give a proper credit, whole Info is taken from: GeoCities
Zip File Includes:
Each Vehicle in Separate Folders
In each folder:
Vehicle's .3DM file (Rhinoceros 5)
Vehicle's .stl files as VehicleName_Whole and Vehiclename_PartX (X is Part Number)
Vehicle Renderings as example; Laid on side, Exploded and Whole
Reference .JPEG file
My aim on these designs was to simplify each design as much as possible and make them all clearly different at the same time. There were few rules that I had whilst drawing such as all windows and door must be voids.
Also, some of them require a drop of glue to assemble, whilst some are assemblable without glue. If you have a printer with large printbed, you can also print it as a whole!
I hope you all will enjoy them, and best luck for all participants!
If there are any questions or ideas, feel free to contact me!
4 hours ago, Stefania Dinea said:
@kmanstudios DAAAAAAMN!!
I do not know how to process this...good or bad?
13 hours ago, kmanstudios said:I do not know how to process this...good or bad?
I think this is good.
14 hours ago, kmanstudios said:I do not know how to process this...good or bad?
@kmanstudios I was just very impressed! (Didn’t figure out how you guys post gifs in this post system yet)
Edited by Stefania DineaJust now, Stefania Dinea said:
@kmanstudios I was just very impressed! (Didn’t figure out how you guys post gifs in this post system yet)
Ohhhh...ok....Just know that is a processing issue on my side (Asperger;s) so please do not be offended. :) I find the gifs, save them to my hard drive and then slide them in as regular media. I found that linking gifs is very limited and this was the way to go.
@kmanstudios To be clear ( i noticed sometimes I am not so clear) - I was very impressed with your work on your submission - and the outcome - so the daaaamn! Was for that , in lack of a gif :((
Thank you,. no worries :) I am just a dunce at some of those things. Some I get, some go right over me. :) Thank you for the clarification....I just thought the goofy presentation was maybe a bit too 'unserious' for some.
Hello,
When will be the results declared?
Recommended Posts
Raghav 2
Great work Man !!!!!
Link to post
Share on other sites