Magic Number - Layer Height Calculation

[ShinerG 6]

Hi, 

What's the pitch of the lead screw in the UM3 - is it 8mm?

 

Here's a great video from Filament Friday on the application of the Magic Number for determining the layer height in the Slicer settings. He has loads of other great tutorials too.

 

 

 

[gr5 2,224]

The full step magic number for the UM2/Um3/S3/S5 I believe is 0.04mm.  There is 8 substeps so you can go finer accuracy than this but 0.04 is a good number to use for the "magic number".

[aine_me 1]

On 11/25/2019 at 3:00 PM, gr5 said:

The full step magic number for the UM2/Um3/S3/S5 I believe is 0.04mm.  There is 8 substeps so you can go finer accuracy than this but 0.04 is a good number to use for the "magic number".

If I want to print on an S5 with AA 0.8 and BB 0.4 what would be a good layer height for that?

[Dim3nsioneer 558]

Cura will offer you a 0.2mm profile for this combination so that might indeed be the best choice.