Ultimaker 1 factory reset- How

[curieux 0]

Hi

Is there any way to do a factory reset on the um1?

Do I have to flash the marlin software do to a reset?

A lot of people changes the configuration and now nothing works anymore 

 

 

[ultiarjan 1,223]

I don’t own a UMO but my first question would be can you still connect to it from cura when you connect it to a pc with an USB cable?

 

If so you can just update to the latest firmware from cura.

[curieux 0]

Yes that's can be done but that's not really a factory reset. 

A lot of parameters were changed during the time and the bed and noozle are completely incorrectly  calibrated. 

Back to the beginning 

 

[ultiarjan 1,223]

Aha, so a firmware install does not overwrite the wrong settings.... someone who has an UMO needs to pitch in here....

 

[tinkergnome 927]

There are two ways to perform a factory reset.

 

1. if an UltiController is installed, it's in the "Control" menu - "Restore failsafe" and a subsequent "Store memory"

2. with GCode command M502, followed by M500, sent on a serial console like (e.g.) pronterface

 

Bed leveling assistant is integrated in Cura AFAIK (in machine settings)?

[gr5 2,202]

printrun/pronterface/prontrface download:
http://koti.kapsi.fi/~kliment/printrun/
 

[curieux 0]

Thx a lot. I will try it