Build Volume Temperature ??

[Link 34]

I have noticed there is a setting for Build Volume Temperature in Cura for my S5, what doe this control ?, i am not aware the S5 heats the build chamber as it doesn't have a lid. There is nothing in the Cura user guide about this...

 

Thanks

[Dim3nsioneer 557]

That comes from some new parameters in the material profiles. Just ignore it as it does not affect the behavior of the S5 as you already found out.

[Link 34]

many thanks

[gr5 2,192]

Some non-ultimaker printers have temperature control for the ambient air inside the printer.  I think when this feature was added they forgot to make it default to hidden for Ultimaker profiles.  It just generates a gcode that is ignored by printers that don't have the feature.

[Link 34]

2 hours ago, gr5 said:

Some non-ultimaker printers have temperature control for the ambient air inside the printer.  I think when this feature was added they forgot to make it default to hidden for Ultimaker profiles.  It just generates a gcode that is ignored by printers that don't have the feature.

Thanks

[jos_maukcc 0]

Our machines have this feature, but I can not seem to find how to get it to produce the appropriate Gcode.

Can you give an example of a machine in Cura that has this?

[ahoeben 1,956]

There don't seem to be any printers using this feature in Cura 4.1. It seems this feature has not yet been implemented in CuraEngine for Cura 4.1.

[jos_maukcc 0]

Thanks,

I was looking for the M141 code but could not find it, and thought I had to set something in the definition file.

Ok, we will wait for it then 🙂

[johnse 31]

Can you add the code to the preamble code in the printer definition? I'm not at a computer with Cura at the moment so I may have the term incorrect, but IIRC you can set GCODE to play before and after a print.

[danielkrice 4]

Any way of stopping Cura from inserting M141 into the gcode? Pops up as an error in Duet everytime a print is started (More annoying than anything else).

 

EDIT - Ignore me - just found it in Cura under build volume temp (I was searching for 'chamber') - setting to 0 removes it from gcode

Edited September 12, 2019 by danielkrice