Print core storage

[abodenha 1]

New to the community. Appologies if this isn't the right place to ask this.

 

How are people storing their unused print cores on the S5?

 

I've got the 2 AA and 1 BB core that came with the printer and a CC core as well. Right now I'm leaving them in the foam of the accessory box and the CC in the cardboard box it came in, but that's a little scattered.

 

I found a box design on line I could print and store them in, but I worry about ESD.

 

Other thoughts?

[Smithy 1,144]

Welcome!

 

I store my print cores not in special ESD cases or such things. Some just lay around and for others I printed some holders which can attach to the printer side. Because I rarely change the print cores, I printed now holders which are just in a drawer to protect them from dust.

 

I am just be careful to not touch the electronics on the print core, but the core itself is not so sensitive as you may think.

[Carbon 28]

This is how we store ours at the moment...

 

Edited August 26, 2021 by Carbon

[abodenha 1]

Thanks!  I think I'll go ahead with printing a box then.

[GoguyT3d 8]

I designed a four core stand that can store the cores hot without touching anything. I printed it on its back and it came out perfect. Heres the stl. if you want it

U3SCore_Stand.stl