Hotend not centered

[joostttbosman 1]

Hey, I am trying to fix a printer and I came across a problem.

 

I wanted to configure the build plate, but found out the nozzle is off the bed.

And when I print a design, it does not print it in the middle.

 

So I think the hot end is not centered on my Ultimaker2+

 

Does anybody know a solution.

[MariMakes 199]

Hey @joostttbosman,

 

Welcome to the Ultimaker Community 🚀

 

Do you have some pictures for us so we can help troubleshoot?
I can ask around for some assembly manual, but first we need some more information on what is wrong.

Thank you 🙏

[joostttbosman 1]

Here are some pictures of my problem. My Hotend is behind the buildplate, so I can't configure the buildplate

Photos-001 (1).zip

[joostttbosman 1]

Here are some pictures of my problem. My Hotend is behind the buildplate, so I can't configure the buildplate

[IRobertI 520]

Your print head is mounted backwards. Remove it by unclipping the rods that go through the print head from the sliding blocks and rotate the head 180 degrees.

[joostttbosman 1]

1 hour ago, IRobertI said:

Your print head is mounted backwards. Remove it by unclipping the rods that go through the print head from the sliding blocks and rotate the head 180 degrees.

Thank you very much. This is a school printer, someone must have messed it up. This will be an easy grade on my exam!

[GregValiant 1,317]

And when you asked the class who did it - did they respond something like this?

[joostttbosman 1]

On 12/9/2022 at 1:55 PM, GregValiant said:

And when you asked the class who did it - did they respond something like this?

Hahaha I want to thank him the person who did this spared me a lot of work.