These are the current travel limits that were set in Marlin from the file you gave me Nicolinux:
// Travel limits after homing
#define X_MAX_POS 70
#define X_MIN_POS -70
#define Y_MAX_POS 70
#define Y_MIN_POS -70
#define Z_MAX_POS MANUAL_Z_HOME_POS
#define Z_MIN_POS 0
How exactly do I measure the limits? I thought it was from the nozzle in the homing position to the top of the build plate. In that case it was around 200mm in distance, which doesn't work. How did you come up with 70?
I'm so close I can smell the plastic melting!
Recommended Posts
Top Posters In This Topic
29
29
25
5
Popular Days
Nov 18
8
Nov 11
5
Oct 28
5
Dec 9
5
Top Posters In This Topic
Nicolinux 29 posts
chrisp 29 posts
jonnybischof 25 posts
ultibrain 5 posts
Popular Days
Nov 18 2014
8 posts
Nov 11 2014
5 posts
Oct 28 2014
5 posts
Dec 9 2014
5 posts
chrisp 10
Yeah changing the board to 33 is the first change that I made. I did have my motors wired up wrong because they have 6 connectors going to 4. That's done and now they work, but I know the travel distance is wrong from homing position to the build plate. The hot-end slams into the build plate.
Link to post
Share on other sites