how to bring the hot end forward for working on

[lance-greene 7]

is there a way to move the hot end to the front and center so i can work on it?

 

[cor3ys 28]

Turn the machine off and move it with your hand

 

[korneel 176]

I've been told ( and demonstrated) directly from the UM team you can just move it with your hand as long as the motors are "free". if they resist, don't move them.

 

[chrisr 18]

I move it (with the machine off) by pulling on both ends of the guide rod(s) one axis at a time.

 

[lance-greene 7]

oh awesome good to know thanks

 

[yellowshark 153]

Or if you have it. just press the arrow button on Repetier-Host

 

[IRobertI 520]

I move it (with the machine off) by pulling on both ends of the guide rod(s) one axis at a time.

 

This is good practice as it's a bit more gentle on the printer. However, you should be able to move the print head around just by grabbing it and dragging it to where you want it (which is what I do). If there is significant resistance when doing this there's something wrong. Most likely the axes are not properly square. If they are, the rods probably need some oil. A single drop of sewing machine oil per rod is plenty.

 

[chrisr 18]

This is good practice as it's a bit more gentle on the printer. However, you should be able to move the print head around just by grabbing it and dragging it to where you want it (which is what I do). If there is significant resistance when doing this there's something wrong. Most likely the axes are not properly square. If they are, the rods probably need some oil. A single drop of sewing machine oil per rod is plenty.

 

Yes, especially those four rods with the phosphor bronze bearings. The thought of those running dry: shudder