nachokaos

You right,i do it straigh,all the ways must be update its a few bugs like material temperatures etc, good to have fix before get, out of the box printer. As you say its so quick and easy to update the firmware from cura to UM.

I think the hairspray do more or less the same then glue stick on a glass and its easy to remove.

The question ,just to know it, are the UM2's delivered after the realese of Cura 13.11 with last firmware update or we have to update when arrives. Thanks..

And the printer.....finally... Lolol

i dont know so much about Filabot(like everybody)but iam a proud owner of a filastruder,and it works really nice,as common in 3D printer world its a bit triky to fix and clean process,but when finish that part was really gratefull, with more than aceptable tolerances,right now i only extrude ABS pellets from a local supplyer i buy 25 k and some colorants,be playing and printing for four months now with good resoults, in off to print a lot of pieces. show you some photos: the green octopus was made with filastruder home made filament and the orange one with premium ABS at 2mm

Ok i make My own response... Lolol .....Looks like the schedule dates goes faster!!!! Pretty faster just receip the shipping email more than a week before. Now i cant sleep till monday..

Buenas R4ix,a mi por fin me acaba de llegar el correo de "enviado"!!!!! asi que dios mediante el lunes tengo aqui mi UM2 y empezare a poner impresiones made in Spain (espero que buenas) hasta ahora tenia una solidoodle2/transformer la cual solo tiene el chasis original y poco mas,todo lo demas se lo he ido modificando sufriendo sangre sudor y lagrimas....aun logrando muy buenos resultados tiene sus limitaciones,tengo grandes expectativas puestas en la UM2 espero que no defraude y que las supere.

Dont really think UM have to response about others software, try first to find a solution at octoprint developers forum Google group etc. All the ways it Looks pretty compatible, i Dont have the oportunity to try with UM2 yet.

good to know the things comes much better for everyone, very good to see a really nice prints like abstract and Naz,that becomes more closer than we expected of UM2. sure we get a lot of knowledge in few weeks about this machine to push it to the limits.

Hi Sander its the new schedule dates go in on time, or better..?or we have to expect another delay...

I really want to see the results of this model and print for myself , it Looks to be a real handycap for any 3D printer.

Habrá que echarle un vistazo de momento me he quedado sin color naranja haciendo calabazas..!!! Lo más barato con diferencia es igo3d 5k +1 por 119.95 sin gastos de envío ósea a 20€k PLA o ABS

No la Ultimaker2 sólo puede imprimir con filamento( sea el que sea y de la marca que sea) de 3mm . la calidad final va en afinar al máximo los diferentes parámetros temperatura velocidad espesor de la capa y un larguísimo etc. El tema es que en los filamentos más baratos ese diámetro de 3mm fluctúa demasiado entre 2,65mm y 3,3mm provocando que el extrusor varié el flujo de filamento depositado. Personalmente me gusta más el PLA menos contaminante muy buenos acabados y si piensas imprimir en una oficina etc apenas huele y no es apenas perjudicial el ABS es más duro aguanta más el calor pero menos la presión huele bastante ,es tóxico y después de largas sesiones en sitios cerrados provoca dolores de cabeza etc

Por ejemplo en faberdashery 100m de PLA de 3mm son alrededor de unos 880 gramos. http://www.faberdashery.co.uk/products-page/print-materials/architects-stone/

Iam allready have the e3d mount on a solidoodle 2 and it change totally the result prints but the original one leaves much to be desired as well. All the ways prefer to print better with PLA its almoust the 90% of the prints.

thats quick...!!!! i think if yours decide to put that limit of course was for some reason...but also its normal to set the limits a bit less then the real ones. all the ways i dont want to melted my brand new jewell. thanks Daid!!

what about print with nylon y really love it, what do you thing about change the limit to 280 or 290 cud be safe in off. this was going to be one of the first changes on the firmware i want to made.

You buy from imakr right, why Dont you tell theirs first maybe its an easy/quick option as a resellers theirs must be responsable about the products their sale.

yes shure, but when we get it, going to be available a new version of firmware and cura as well and the knowledge of the first adopters

here its some issues to compare as well enjoy the video...... http://youtu.be/zBBBBXCqX9E

Simmon you must change the name of the post for Final weeks!!! Just joking. at the end wait a bit more means a more stable firmware, software and a bit polish machine so us experience going to be gratefull than others.

and me....i think its the 152.345.693 time i refresh the order page ... :oops: :oops: :oops: and still "ready"...

Muy buenas,en Cura se pueden introducir los parametros de costo del material etc lo cual te da una idea muy cercana del gasto de material por pieza,evidentemente va en funcion del material que utiliceis,un material mas barato normalmente tiene un diametro mas variable y peores resultados que un filamento mucho mas caro y de diametro estable.un material caro pero de excelentes resultados para este tipo de trabajos es Laybrick. PD:y si esperemos tener la UM2 en poquito tiempo.....

Congrats !!!! Mattkaz leave us some feedback to make the wait bearable...

What i know: 1: yes but only on resellers igo3d (germany) and imakr(london) Dont know if are others to pick up. 2: Dont think so... 3:Physical characteristics Printing material 3MM PLA Print technology FUSED FILAMENT FABRICATION Printer weight 11 KGS printer dimensions 492 X 342 X558 MM build volume 230 X 225X 205 MM nozzle temperature 180°C - 260°C heated build plate temperature 50°C - 100°C 4: must be..... theirs send that bright jewel all around the world so ... Shure be well packed . Thats what i know hope you feel help with it