-
Posts
949 -
Joined
-
Last visited
-
Days Won
3
Content Type
Forums
Events
3D Prints
Posts posted by Titus
-
-
You don't need the receipt - just the serial number and then you can send a personal message to sander to check. Or contact support.ultimaker.com with the serial number in your message. Hopefully you will get an answer within a day. Or call them - they usually answer the phone during normal working hours Netherlands time and speak english incredibly well.
This is what I meant
-
From an email conversation with Sander things should be moving again mid-end July. And beta before that.
Personally I think that's too much of a radio silence again. While the improvements are really nice, there's still stuff missing. And though they are working on it, I still see only a few posts per day compared to what it used to be. Every day that the forum is performing less than the old some old members are becoming less active. But I trust UM is doing their best to work as fast as possible while maintaining quality.
- 1
-
Probably will be ok, but perhaps ask for the original receipt, to verify it's not one of the stolen UM2's.
-
Not sure about simplify 3D, maar als je de Zspeed en Zacceleratie wat omhoog zou gooien, dat hielp bij mijn UMO altijd erg(ookal zou hij misischien een beetje op en neer blijven veren, gezien het andere topic)
-
Oh, and we have a contest for new plugins. You can find it at: https://cura-ultimaker.com/
Hadn't heard/seen it till now. In what do you develop plugins actually? I'm interested
-
oh gawd I have unleashed the comments leading to off topic.
I'll fill out the form.
/ON topic:
How was the new Cura, what's new? Tell us some things about it
-
@SandervG, this might be considered off topic, but as nice as the videos of previous ultievenings are, they are useless for information spreading.
You are creating useful information by having people come and talk about things, it's being recorded, but I can't find other videos than useless promotionals.
I can understand it takes time to edit stuff, but I haven't seen one complete vid from the last year. This is just a waste of spreadable information! Looking back at vids like this, that is much more interesting for us:
The same goes for last ulti-evening. I couldnt come as I'm restrained to bed after a traffic accident, but I do want to know all about the new Cura! I hope there'll be more vid material than the 2 minute promo with music.
-
I was going to post this yes
This is ideal for auto prints! Just print, cool down, TIGER UPPERCUT, and start printing the next one
- 1
-
I keep getting ghost notifications....
https://ultimaker.com/en/community/view/16251-the-future?page=2#reply-109048
-
Nice one! Although it sounds like a pinball machine
-
All topics (standard selection)
- Ideas
- Questions
- Answered questions
- Unanswered questions
- Following
- Unread
- Topics I've been active in
All categories (standard selection) (this dropdown only shows up on the topic overview pages)
- Shows all categories and subcategories
Since last visit (standard selection) (this dropdown only shows up on the topic overview pages)
- All time
- Past month
- Past week
- Today
Latest activity (standard selection)
- Most liked
- Most viewed
- Most commented
Can these things PLEASE PLEASE PLEASE be linkable, or somehow fast accesable. I'd hate to open up the main page, and click twice. Rather open it at once, or only click once.
-
Depends on how frequently you check right?
I check every 30-180 minutes.
I'm not saying it should be the blue bar, it could be some other clever thing, but look at the old forum, there was something like it and it worked great for me.
-
@sandervg You are right about the blue bar(i like that), what I meant was that I dislike it not being there somewhere on the first two images. As I described in our meeting
-
As I indicated when I'm looking for unread stuff I look on the left. Now in the community overview (picture 2) the unread notice is at the right, saying XX unread or View Last.
It's better already in picture 4.
I'd have to play arround with it before I can really tell if it matches the ease of use of the old forum
-
It's live! Finally better stuff on the live vs the beta.
Brace yourself, better times are coming
- 2
-
to buy it.
uhm whut ?
-
Thanks, that works, but the UM site points me towards the one I linked in the topic, that's why I posted it
-
https://ultimaker.com/en/software/download/26/Cura_15.04.exe
Gives an error for me.
-
Hi @SandervG another phone issue, again the media thing is still there. But I also figured out why my keyboard kept popping up, there's a text box somewhere in the top left corner
[media=2013][/media]
[media=2014][/media]
-
I remember increasing my Zspeed and Zacceleration to have less z scarring and faster performance, I'll have to look into that as soon as I install my HBK!
-
I wonder, if this seems to be a problem, why UM2 users havn't reported this
-
I take back what I wrote in my previous post, being that previewing doesn't kill the post.
It does, but only when you actually POST it.
I feel you @Blizz
-
The Cura release topic in my case. Even takes me to the first page rather than the "new" ghost post(probably spam?)
-
I'm building/sourcing one now too. Impressed with the leveling system! Got to install it in the printer still though.
Is it possible to run it without the heated bed/electronics connected, just having the platform for now?
Thoughts about the new Cura
in UltiMaker Cura
Posted · Edited by Guest
uh oh. Not an other UM forum release with errors in Cura this time!
Also, really? Captcha on download? Are you guys getting lots of spam downloads?
EDIT: also, windows 8 is giving the installation file the, uhoh, might be harmful treatment.
I'm sure people will not install it because of that, either because they dont trust it, or because they simply can't find the damn button to.