Titus
-
Posts
949 -
Joined
-
Last visited
-
Days Won
3
Content Type
Forums
Events
3D Prints
Posts posted by Titus
-
-
Just 1 day left, or will it be Cura 15.11?
-
-
You can pick multiple locations. I believe I picked the 19V leds port. But if you pick the HB you can turn it on and off using Gcode
I opted for a switch hidden in the bottom. -
I skipped the caps
If you use a 7812, there is some (quite?) some heat, just to be sure I added a heat sink I had somewhere Using a DC DC converter should be the best solution. -
Take a look at this topic and my entries there
https://ultimaker.com/en/community/view/1605-adding-12v-leds-to-ultimaker
-
I believe Octoprint on a raspberry pi had a feature for that, people were using.
Other than that, I don't know, I just got my DSLR and some video editting software.
-
@nallath, I think creating an issue on github is quite a barrier, especially since people(myself included), don't know if they are doing something wrong, or that it is actually an issue.
I'll make one of my last post, I hope it's useful.
-
Thanks both, I'll give that a try. I was making sure it was visible and most of all, could be felt.
-
It's the DHD
Had some trouble with support but holding parts up manually worked out ok
I'm happy with how flat the print is(just have to fix that smoothness problem), but I definitely need more cooling power as you can see on both prints. -
Yeah but there is more. If I just use "bundled" it's the second hit(bundled is mentioned in the post).
When I search "bundled cura", it's gone. The search prioritizes CURA hits over hits with both Bundled and Cura.
That is not a good search engine xD Even google searching the entire web gives me the right result first, without mentioning anything else:
-
I think your part is not getting enough time to cool down before the next layer. Therefor it stays glass like and you push it around when printing the next layer, and thus push it 'outside' the part.
-
What is this version doing to support
Check this out:
[media=6979][/media]
[media=6980][/media]
The support starts mid air! What the hell? The goal of support is to not start in mid air xD
It looks like it takes the highest layer it has to put support on to start on, rather than let it grow. I checked 15.04.2 and that worked correctly.
File: http://www.thingiverse.com/download:1520868
I hope my print comes out fine, I noticed this only when my print started doing strange stuff :(
Just had to babysit the print to make sure two pieces got glued together rather than break off. Don't think it will be sweet looking :(
-
I was under the impression that the search engine was working, since at some point you had one that performed quite well.
But even when I search for the exact title, I can't find it(or atleast get it as a hit on the first page):
Try: "[New question!] Bundled questions about Cura"
Should find this:
https://ultimaker.com/en/community/view/8018-new-question-bundled-questions-about-cura
Also it's missing some images there
Another thing: [media=6981][/media]
Mark as read is not working in that topics view, only in category view...
-
Who can guess what the next print is becoming
?
/off topic, is this first layer so messy because of the glue, because of leveling that could be off, or should I decrease the 0.3 first layer that was pretty much necessary for UMO without heated bed.
-
I'm printing on an UMO with HBK, I wasn't talking about the elephant feet, but that the lines show and that you feel that some parts are not entirely flat. Given a print from @Korneel for example, that bottom was soooooo smooth.
Perhaps it's too much glue, or wrong glue?
-
I bought these:
Couldn't find them in the store, and had to order anyway for something else
-
Somehow the rotation of images isn't read out well. Windows does the job but here they are rotated:
https://ultimaker.com/en/community/view/1467-post-your-latest-print?page=140&sort=#reply-122288
-
From the printer:
After some finish:
Detail
How do you guys get that incredibly flat bottom. I still get some relief in the bottom, although it is flat.
-
a) Do you need this?
b) Do you get something useful out of it?
if not, please remove it. If so, please remove it either way.
-
1
-
-
What about adding a grey bar when the post is read, in stead of the blue bar, but still let that direct to the last post. So you won't have to go all the way to the right?
-
I'd say that Korneels slides contained much more info than the summary. I like the article idea for new people, but most forum users are power users and want all the info.
Also @SandervG please mention in the atomic pull tutorial to put the extruder head in a corner. People are going to ruin their machines by having the head in the middle.
-
For example, this topic will always be on top.
1 vid is missing and usefull is actually spelled as useful
-
This is something I hadn't seen in beta, but I like it:
-
1
-
-
Need right side only to jump to first unread answer.
This is the most inconvenient way of doing this to be honest. I was specifically looking for it and still didn't see it. As you know on the old forum you could click the robot/dot/thingie on the left.
I ended up clicking the last repliers name to go to the last post, scrolling up and navigating a page back to find the new posts.
And this:
indeed in the subpages, not on the main forum page. It's fine, the best thing is that it's there again..
I opted for a switch hidden in the bottom.
If you use a 7812, there is some (quite?) some heat, just to be sure I added a heat sink I had somewhere 
Path Planning Algorithm Used in Cura
in UltiMaker Cura
Posted
Interested in that too. I believe it's an interesting research topic for academics