Print challenge. OK?

[SandervG 1,521]

Hi,

@DidierKlein and I came up with a challenge which we could roll out in the community.

Inspired by @Rigs print.

A while back a long bearded guy named @AaronAlai tried to set up something like a monthly challenge.

After a few contests this stopped because I think life happened.

But I would like to give it another try, at least for this one challenge, and we can see where it goes!

Price: eternal (.. or at least a month) honor and respect within the Ultimaker community!

Challenge: Print this OK Hand as small as possible.

Edit, We also put together some requirements:

1 the pink should stand loose from the other fingers.

2 the hole between the thumb and pointing finger has to be open.

Since there are quite a few modded / enhanced Ultimaker's out there it is only fair that if you took the time to work on your Ultimaker you can also enjoy the benefits from it. So everything goes!

Just mention what upgrades / modifications you have when you upload your entry.

Would it be fun that who ever wins, gets to pick the next challenge?

Ready.. set.. GO!

Edited August 28, 2015 by Guest

[DidierKlein 729]

All i have to say is:

[MartijnvG 16]

i'm game

[nallath 1,123]

Pff! Paul chandler will win this.

[SandervG 1,521]

Pff! Paul chandler will win this.

 

I have already invited him

[MartijnvG 16]

Pff! Paul chandler will win this.

 

He told me his max was this hand at 5% size. now i must beat him :angry:

[Labern 774]

5% is way to big

[peggyb 171]

5% is way to big

 

https://ultimaker.com/en/community/prints/1041-micro-working-circular-saw

must be easy to handle this...

[MartijnvG 16]

first prints detached from bed, rookie mistake.

lets go again

[MartijnvG 16]

First attempt

have to fix the stringing. but this is at 5% normal hight

0,25mm nozzle from olssonblock

Edited August 27, 2015 by Guest

[SandervG 1,521]

First attempt

 

.. it needs to be pretty too!

[MartijnvG 16]

 

First attempt

 

.. it needs to be pretty too!

 

Hahaha, hey give me some slack. first attempt here

[MartijnvG 16]

Second attempt

0,25mm nozzle 5% original size

0,04mm layers

[MarvinT 1]

What is the requirement in order to be accepted?

I would suggest that:

   1 the pink should stand loose from the other fingers.

   2 the hole between the dumb and pointing finger has to contain a hole.

MartijnvG's second attempt would pass on both criteria, however... we can do better than that

[Labern 774]

 

@MartijnvG Keep posting photos of your prints, but try and make the background less fuzzy and stand next to your latest projects

[SandervG 1,521]

What is the requirement in order to be accepted?

I would suggest that:

   1 the pink should stand loose from the other fingers.

   2 the hole between the dumb and pointing finger has to contain a hole.

MartijnvG's second attempt would pass on both criteria, however... we can do better than that

 

I second!

@Labern, where is your entry??

[Labern 774]

I have a month right? (hoping a form 2 comes out by then:D ) I will give it a try soon. Ill have to find my micrometer and magnifying glass first

[Labern 774]

If we can't print one smaller then @MartijnvG then im going to blame him for not developing a good enough printer.

[IRobertI 520]

I say we blame him anyway. Someone's gotta take the hit!

[nallath 1,123]

He's an intern. He's supposed to get the blame. That's what interns are for

[MartijnvG 16]

He's an intern. He's supposed to get the blame. That's what interns are for

 

I only intern of Fridays all the other days i'm just a normal r&d'er.

@labern Is this the thanks i get for helping you with the fanduct

Edited August 28, 2015 by Guest