How to control the work of um3 from the internet?

[teleporteur 6]

How can we view the UM3 camera from the internet and give a stop command in the event of a problem?

There is the application "Ultimaker 3 app for android" but it only accepts wifi connection and no setting to go through internet

Thanks

Alain

[neotko 1,417]

Check this post of @ultiarjan

https://ultimaker.com/en/community/23534-remote-monitoring-control#reply-171200

[teleporteur 6]

We have the video on internet -> ok

how can I give an "stop printing" command to my um3?

[Brulti 177]

@teleporteur I don't that's possible yet. We've solved the problem here by buying a WeMo. It can be turned on and off through the web, and the printer is plugged on it, so we can turn the printer off at a distance if we realize that a nightly print has gone sideways.

[Marco_TvM 34]

Actually, you can, using the WEB API:

http:///docs/api/PrintJob/put_print_job_state

You can send an abort or even a pause command to an active job.

To send commands, you need to be authenticated though, and for that, you need physical access

Edited September 22, 2017 by Guest

[teleporteur 6]

Your http:///docs/api/PrintJob/put_print_job_state display the wifi setup page of the UM3 ...

You do not get a page where you can stop printing.

My UM3 is connected by cable rj45

[tinkergnome 927]

You do not get a page where you can stop printing.

Actually this was a link to the documentation.... but it seems that the path has changed a bit (at least for firmware 3.7.7). The correct link should be:

http:///docs/api/#!/PrintJob/put_print_job_state

Anyway, you have always access to the full API Documentation directly from the printer:

http:///docs/api/

[teleporteur 6]

it seems that it is a function to integrate in web pages to put in a website?

Would you have an example of a page to get started, not being a java script specialist

Someone would have an example of a page showing the status of the UM3 with a STOP button ... that I could put in a website (private) plus I have a fixed IP address at home

[CarloK 204]

Not a complete example for your question, but it should help you understand the used techniques: https://ultimaker.com/en/community/23329-inside-the-ultimaker-3-day-3-remote-access-part-2