Nicely done.
So once again it seems that at higher speeds PLA material doesn´t have enough time inside the nozzle to achieve the right temperature, and this can be improved with some PLA material who doesn´t need so much temp... with this in mind, UM White should be the worst material and Faberdashery filament should be the best...
I am starting to believe that a shorter nozzle is the guilty one...
Recommended Posts
Top Posters In This Topic
196
87
78
42
Popular Days
Jan 27
48
Jan 15
41
Jan 18
33
Jan 17
26
Top Posters In This Topic
Nicolinux 196 posts
gr5 87 posts
illuminarti 78 posts
braddock 42 posts
Popular Days
Jan 27 2014
48 posts
Jan 15 2014
41 posts
Jan 18 2014
33 posts
Jan 17 2014
26 posts
woofy 12
Today I had my first batch of Faberdashery filament arrive, so I thought I'd do a side by side extrusion test with UM Blue and Faberdashery Arctic White.
Both at 230C
UM Blue fails at 5mm/S and Arctic White at 7mm/S
Link to post
Share on other sites