Problems with Ultimaker S2 Build Volume

[tyler1543234 0]

I have tried to print the following part but the same error keeps appearing on my machine which is not allowing me to print. The error is "This file does not fit the build volume". I have since done some research and followed the Ultimaker information on printing at the maximum build volume and still no success. The part is no where near the maximum height or area of the build plate.

 

Does anyone have any suggestions on what I can try?

 

Thank you in advance.

[gr5 2,196]

Please save your project so we can look at it.  That will contain your model and all your settings.  In the menu do "file" "save project as" and post the resulting file here.

[Labern 774]

You Picture shows that you have selected S3 printer but you title say S2. was this a typo or do you have a UM2?

[tyler1543234 0]

2 hours ago, gr5 said:

Please save your project so we can look at it.  That will contain your model and all your settings.  In the menu do "file" "save project as" and post the resulting file here.

 

MSIC HOLDER ITERATION 3 PRINT GOOD.ufp

[ahoeben 1,965]

I am sorry, that is not a project. Please use the File -> Save project... menu option, not the File -> Export... menu option

[gr5 2,196]

8 hours ago, ahoeben said:

Please use the File -> Save project... menu option

Lol.  yes.  Please.  Also what kind of printer do you have?

 

[MechDesigner 3]

Tyler,

I loaded the file and I got the G-code error,  I did notice this, it is part of the file.

[GregValiant 1,318]

;PRINT.SIZE.MIN.Y:-939240