gpb01

Before you throw away the whole spool, have you tried method? Guglielmo P.S.: The video is really horrible, so ... be patient. Many people have tried it and they say it works. I also read that, after a few days, the filament back to brittle, but, in any case, it is worth making an attempt

Stai dando un po' poche informazioni per poter capire il problema ... - tipo di filamento, marca e diametro esatto - temperature dell'hot-end - velocità a cui estrudi - ventilatori - ecc. Riguardo lo spingi-filo, sicuramente uno tra i migliori è QUESTO, montato già da un anno, va che è una meraviglia Facci sapere ... Guglielmo

Hi, what I can say now, after over nine month of usage, is that the Fan Base UM2 by Zetoff work very well and I'm very satisfied with the results Adding, ad described, a little metal shield (... from a beer can ) , I don't have had any problem of deformation due to temperature of the hot-end Certainly I recommend it! Only one negative point ... to mount and dismount ... you have to remove the fans first ... :( Guglielmo

+1 I never understand why I have to do a new "bed leveling" if I only change the firmware version ... :mellow: Guglielmo

Are you sure ? Or maybe ... you call it "material-copy.txt" ? Because in a 8.3 file system material.txt and material-copy.txt ... are the same file and, probably, the firmware see only the oldest one Guglielmo P.S. : Daid explained this in another thread ... HERE

Oops, it's true, I'm sorry but speaking English, French and Italian I follow all three sections and sometimes I mix things ... Anyway ... searching on Google give many results ... but the end is still the same : You can use "Octoprint" with UM2 but NOT using UltiGCode (... which is not supported by Octoprint). You have to switch Cura to produce Reprap (marlin/sprinter) GCode and you have customize the "Starting" and "Ending" GCode. Guglielmo

Yes ... totally agree ... Guglielmo

Yes, this is true, but is also true that the speed is limited to 250 Kbps ... which is 25 Kbytes/sec ... if you have a big print ... good luck :grin: Guglielmo

If you "search" in the forum you can find may discussions on Octoprint and UM2 ... e.g. HERE Guglielmo

I'm very happy with the 14.12.1 and, finally, the temperature is really stable ... +/- 1° (... with 14.09 I had fluctuations of +/- 10°). I read that few other people have had problems ... but I think due the heaterblock and the heater cartridge. You can find some discussions in "Cura" section on the forum Guglielmo

Me too because of the ease of inserting and removing filament and also no more issues with grinding after the upgrade. Very satisfied. Guglielmo

Je crois aussi ... ... avec l'ancien firmware, je ai eu des oscillations de +/- 10°, avec le nouveau la température reste stable au grade (... et je utilise celui-ci ) Guglielmo

Yes, if the logo was smaller and in a corner ... it would be much better Mmmm ... I made in PLA and I put the aluminum shield (... made from a can of beer ) in the space provided ... it's now 1 month that I print without any problem and any fan base deformation, more ... prints are very good ! Guglielmo

36 hours ? ... sorry, I don't want to be unkind ... it's just a joke You know, I see answer to ticket also ... after one week and more ... unfortunately ... :( Do a tour of the forum and you'll see ... Guglielmo

Do you see my fan support ? I think that with mine (... which is an evolution of what you're using) ventilation is higher and, I repeat, I have no problems, so ... maybe the problem is in the heater/heaterblock ... do you read about the 21W and 27W heater ? I don't know but ... if you have the 21W and not a perfect thermal contact (... have you tried putting some thermal grease, like http://www.ebay.it/itm/111238367541 one between the heater and the heaterblock ?) ... maybe the strong ventilation can become a problem ... :huh: Guglielmo

darkdvd, I use https://www.youmagine.com/designs/fan-base-um2 fan support with the new firmware and I have NO problems (both on short or on very long prints), so ... your problem should come from somewhere else. Did you read the Daid info starting from http://umforum.ultimaker.com/index.php?/topic/8634-curas-1412-firmware-is-screwing-my-um2/&do=findComment&comment=82720 ? Guglielmo

Faites attention ... "Artic Silver" ne est pas fait pour des températures si haut : Le seul que je connaisse qui peut atteindre des températures élevées c'est ce ICI ... Guglielmo

Mmm ... I can only suppose that 3 or 3.05 ... is the same ... if you reach and go over 3.1 ... probably you have problems, so ... you have to try. Only one suggestion ... do not be discouraged, sometimes it is not a problem in diameter, but the filament ! I lost at least 10 hours of work before being able to get some great prints with the ESUN filament, but once I found the right parameters, I've had no problems Guglielmo

I don't think so ... It's now 3 weeks that I use the ESUN 3mm PLA filaments and, after an initial difficulty figuring out how to set the parameters of "Cura" (... not an easy job with ESUN filaments ), now I have the perfect prints (...and I've done some print for more than 24 hours). Guglielmo

Je sais que c'est une question trivial, mais ... ... tu as fait le "login" (... en haut à droite) ? Parce que, sinon, tu n'a pas accès à la configuration de la porte. :unsure: Guglielmo

Si tu veux l'essayer sur Mac, ça marche pas mal dans "Parallels" Guglielmo

Download the last version of http://software.ultimaker.com/ (14.12.1), connect the USB cable and update the firmware. The new version fixes many problems ... Guglielmo

WOW ... thanks Didier ... I have always ignored this Guglielmo

+1 , difficult to split, best to use supports maybe created with ... MeshMixer which I like ... just for the supports Guglielmo

Look http://umforum.ultimaker.com/index.php?/topic/8707-need-to-split-an-object-into-2-part-and-save-the-gcode/ and http://umforum.ultimaker.com/index.php?/topic/8427-dividing-a-large-print-into-several-smaller-prints/ Guglielmo