Hi Brian,
Closing up the build volume is a big help! I made a lid for the front (without needing to drill holes!) https://www.youmagine.com/designs/ultimaker2-temperature-lid
To cover the top is a bit trickier, for now I use a blanket of kitchen towel that I keep in place with some paper tape, but thats far from ideal (looks awful and the bowden gets deformed)
Recommended Posts
kris 29
Hi
1. Allways use prim
2. Close up build volume ('green house)
3. Raise bed temperature to 110C
4. Turn of fan (in cura)
Constant and relatively high temperature inside the build volume is the key
Cheers
Link to post
Share on other sites