DidierKlein 729
Oh god didn't see that one thanks mike
On Windows 10, I click on the icon, and nothing happens
Oh, sorry, I'm using linux...
Cura 2.4 won't launch on my computer :(
https://ultimaker.com/en/community/35485-cura-24-beta-is-here?page=2#reply-167377
As you guys might have noticed, Lulzbot is also working on Cura 2.x these days. They have already made a pull request that was a bit too late for 2.4 that adds a G-Code reader to Cura. They've also mentioned that they are going to work on better USB controls.
FieldOfView also made some mockups for how the jogging / remote control should look in Cura.
Cura 2.4 won't launch on my computer :(
https://ultimaker.com/en/community/35485-cura-24-beta-is-here?page=2#reply-167377
Thanks, it works !
Looks like there's still an issue, at least in Windows (7 in my case) not loading
I tried to be good. Un-installed previous version (2.3.1) and installed 2.4 Beta.
Not launching. I recall previously something had to be renamed somewhere in appdata last time, but can't seem to locate those details. Help!
(At the rate you guys change versions, it would be really convenient if you nailed down this bug!)
(p.s. Keep getting Error 500's on your website today)
Edited by GuestLooks like there's still an issue, at least in Windows (7 in my case) not loading
I tried to be good. Un-installed previous version (2.3.1) and installed 2.4 Beta.
Not launching. I recall previously something had to be renamed somewhere in appdata last time, but can't seem to locate those details. Help!
(At the rate you guys change versions, it would be really convenient if you nailed down this bug!)
(p.s. Keep getting Error 500's on your website today)
The link to the answer is just one post above
Here's what it links to:
Won't load for me at all. The splash screen comes up and then it just closes. :(
Same was happening for me. I uninstalled 2.3 and then moved out the directory under Users/name/appdata/local/cura (or whatever, I'm going from memory). Then it came up fine.
I'm still not seeing cubic subdivision infill show up though in the layer view. This is a bummer, because this feature is the only reason I uninstalled 2.3 and installed 2.4 beta to begin with.
DidierKlein
Yes corrected.
But WHAT was moved? The comment "whatever" doesn't help me much
But WHAT was moved? The comment "whatever" doesn't help me much
The directory Cura under appdata folder (just type appdata in your file explorer it should point to your directory.
Move that folder to a backup anywhere (so cut and paste)
Okay, I follow you now.
For others...
Using File Explorer, click over to
C:\Users\{Your profile name]\AppData\Local\
RIght click on the cura folder, select Rename, rename it 'cura.bak' (or whatever) and hit enter
Fire up Cura 2.4 Beta It'll take a few moments and then open
And...my first grievance! "Scale Large Models" on ON by default! FIX this!
I have seen that Cura 2.4 Beta 2 has been released. What are the changes ?
I have seen that Cura 2.4 Beta 2 has been released. What are the changes ?
See Thread
Edited by GuestHere's a nice user-friendly changelog if you want to view it before installing: https://ultimaker.com/...cura-24-beta-is-here
I'm sorry, the Beta 2 has been published few days ago and I don't see thread update
The hollow prime tower has been removed in Cura 2.4 beta 2.
I'm sorry, the Beta 2 has been published few days ago and I don't see thread update
Nor do I. I've been looking around the forum and not seeing a new thread on it?
>>snip
Who ever stops after just slicing?
Well me for one. I have always used Cura to slice and Repetier Host to control the printer - lots of advantages including usb connection. Cura is on one laptop and drops the STL onto a network drive and the printer laptop, attached via usb, pulls the stl from the network drive and prints it.
Of course if one is used to using Cura to print I can see the issue is a bit of a b*mmer. For me Cura morphing to just a slicer is OK.
Edited by GuestCan I just add my request to the list to sort out the implementation process so that different versions of Cura can co-exist on the same laptop. I would love to get my teeth into 2.4 beta but I am too busy at the moment to risk screwing the machine and not being able to get 2.3.1 back quickly and correctly. Right now a loss of a days production would be disastrous and will remain so for some considerable time.
I guess I could spend 500eu on another laptop but that sort of defeats the object of Cura being free. Mind you I wold be happy to pay for Cura if this sort of thing was working.
Recommended Posts
Top Posters In This Topic
10
9
8
7
Popular Days
Jan 31
13
Jan 9
11
Dec 26
9
Dec 24
7
Top Posters In This Topic
ultiarjan 10 posts
yellowshark 9 posts
tinkergnome 8 posts
bagel-orb 7 posts
Popular Days
Jan 31 2017
13 posts
Jan 9 2017
11 posts
Dec 26 2016
9 posts
Dec 24 2016
7 posts
Posted Images
tinkergnome 927
It doesn't seems so...
https://ultimaker.com/en/community/35554-cura-24-print-seq-one-at-a-time-retraction-between-objects-issue
Link to post
Share on other sites