I made a mini Ultimaker3 :P

[ultiarjan 1,223]

modified my diy GO with the Ultimaker3 head ... because I can  

 

[catohagen 41]

Omg how cool when can we ordinary people buy um3 heads ?

[ultiarjan 1,223]

Ofc ultimaker does not sell complete um3 heads.... but a New Zealand retailer had most spareparts published on its website.... and I just ordered the spareparts at my local reseller, mostly based on that list

[nallath 1,123]

[gudo 246]

Cool ! your UM 2Go takes a big head ! it's now it " the Big Brother " of the UM3

[drayson 75]

Amazing mod!

So assume, with a little more effort, my UMO can be pimped too... :-)

[Dim3nsioneer 557]

Omg how cool :)when can we ordinary people buy um3 heads ?

Contact your reseller or distributor. He has the possibility to sell you spare parts which are not listed by Ultimaker under the product menu.

Or you are a bit patient and print your UM3 head by yourself when the hardware source is published.

Edited August 30, 2017 by Guest

[ultiarjan 1,223]

Omg how cool :)when can we ordinary people buy um3 heads ?

Contact your reseller or distributor. He has the possibility to sell you spare parts which are not listed by Ultimaker under the product menu.

Or you are a bit patient and print your UM3 head by yourself when the hardware source is published.

I'm not going to publish a parts list of the head before Ultimaker publishes the Hardware source (probably in October) but if you PM me and promise not to share the list I can share it ....

[neotko 1,417]

I'm not going to publish a parts list of the head before Ultimaker publishes the Hardware source (probably in October) but if you PM me and promise not to share the list I can share it ....

A simple google Ultimaker 3 Printhead found this

http://www.mindkits.co.nz/ultimaker-parts-386.aspx

They list the SKU numbers. So it’s pretty much public for most parts

[ultiarjan 1,223]

I'm not going to publish a parts list of the head before Ultimaker publishes the Hardware source (probably in October) but if you PM me and promise not to share the list I can share it ....

A simple google Ultimaker 3 Printhead found this

http://www.mindkits.co.nz/ultimaker-parts-386.aspx

They list the SKU numbers. So it’s pretty much public for most parts

Indeed a good source.... But not complete

[neotko 1,417]

I'm not going to publish a parts list of the head before Ultimaker publishes the Hardware source (probably in October) but if you PM me and promise not to share the list I can share it ....

A simple google Ultimaker 3 Printhead found this

http://www.mindkits.co.nz/ultimaker-parts-386.aspx

They list the SKU numbers. So it’s pretty much public for most parts

Indeed a good source.... But not complete

What else would you need for the mod? The custom cnc you made right?

And ofc the 12V fans version of the delta 35x35x10 fans, they cost 10€ on mouser (same ones gudo used for his fancap before um3 was released)

Edited August 30, 2017 by Guest

[LePaul 324]

Well it looks neat....but that's a giant print head and little printer....so your print volume is what? 3 inch x 3 inch

[ultiarjan 1,223]

Actually the go has so much space around the bed you (hardly) don't loose any.... But it's still a small go ofc....

Just made the thing for fun. Obviously it would make more sense to put the head in a um2 or umo.

[neotko 1,417]

Actually the go has so much space around the bed you (hardly) don't loose any.... But it's still a small go ofc....

Just made the thing for fun. Obviously it would make more sense to put the head in a um2 or umo.

Or just thinking out loud.. With the source files on October and the @gudo xycore I could see that pretty and heavier printhead moving with quite sweetness on a rail slider system...

[nilrog 103]

Well it looks neat....but that's a giant print head and little printer....so your print volume is what?  3 inch x 3 inch  

The Go is a sweet little printer...with better print quality than the full size UM's.

I rarely print things that would not fit on the Go's bed. And it's the perfect size to have in your house...or for your kids to play with

[nilrog 103]

Or just thinking out loud.. With the source files on October and the @gudo xycore I could see that pretty and heavier printhead moving with quite sweetness on a rail slider system...

Oops, you took the words out of my head

When Gudo's CoreXY is out, and I have time , I want to try to realize my ideas