2 hours ago, Crono986 said:
I run defaults on my 2+
The only reason I fiddled with the 3E slicing settings is because of this issue
I am printing a high poly cylinder and a medium poly cylinder now on the same print to see if it's an STL export issue
ToughPLA also arrives today, so let's coordinate on what we would like to print
I suggest this:
https://www.thingiverse.com/thing:2166102
I will print it on my um3, Cura 4.6.1, default 0.15mm with ultimaker tough black pla setting. Probably will be on my printer in 24hours. (is busy now)
Recommended Posts
Crono986 2
I run defaults on my 2+
The only reason I fiddled with the 3E slicing settings is because of this issue
I am printing a high poly cylinder and a medium poly cylinder now on the same print to see if it's an STL export issue
ToughPLA also arrives today, so let's coordinate on what we would like to print
Link to post
Share on other sites