-
Our picks
-
Here it is. The new UltiMaker S7
MariMakes posted a topic in Official news,
The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
So what’s new?
The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
The UltiMaker S7 also includes quality of life improvements:
Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more
Curious to see the S7 in action?
We’re hosting a free tech demo on February 7.
It will be live and you can ask any questions to our CTO, Miguel Calvo.
Register here for the Webinar-
-
- 10 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
.png.e7a3560300dbb24c6ece29a701a84b73.png)
Cura 5.3 Alpha With New Tree Support 🎄
MariMakes posted a topic in Ultimaker Cura,
Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.-
-
- 16 replies
Picked By
MariMakes, -
-
New here? Get ahead with a free onboarding course
SandervG posted a topic in Official news,
Hi,
Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.
They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access.
Ready? Register your product here in just 60 seconds.-
-
- 14 replies
Picked By
SandervG, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
.png.e7a3560300dbb24c6ece29a701a84b73.png)
Recommended Posts
Top Posters In This Topic
184
148
147
135
Popular Days
Sep 15
32
Apr 30
27
Nov 6
26
Mar 27
23
Top Posters In This Topic
skint 184 posts
SandervG 148 posts
ian 147 posts
IRobertI 135 posts
Popular Days
Sep 15 2014
32 posts
Apr 30 2014
27 posts
Nov 6 2014
26 posts
Mar 27 2014
23 posts
Popular Posts
LesHall
Here are some photos of a Chainmail sphere in progress. It's from a design I created ten years ago and thankfully the writeup is still available. The plan is to write an updated tutorial with some e
Ghene
yay! It was a pain to hold the fabric. my clips are either too big or too small. 😞
cloakfiend
Well the fabric has taken a different path what i had planned failed due to other colours and the fabric being too thick. but in the meantime the S5 and dry ice, lol. why not, i just had s
Posted Images
emare 4
Hi,
my day was really awful, hectic, too many things to do.
I'm looking forward to drinking a good beer at home tonight.
Link to post
Share on other sites
fbrc8-erin 266
@emare I hope your evening is better than your day was.
Link to post
Share on other sites
emare 4
Thanks, yes it was indeed. On my couch, beer, TV, cats 😻
Link to post
Share on other sites
SandervG 1,518
That sounds good, and not hectic at all. Everyone needs a rest every now and then. Take care!
Link to post
Share on other sites