And have a flourishing and vibrant community
- 1
And have a flourishing and vibrant community
@sandervg this is great news. I am so happy for us. I also agree with @lepaul that "ease of use, quick load time, pleasing to the eyes to view content and so on" should be factored into the reboot. This site forum (and the UM site) is horrible on so many levels. I am so happy about this news. Is it too much to hope that you will be ditching this font too.
I can't reveal the other platforms we tested (perhaps @Sandervg can)...but you'll be happy to know everything we sampled was really good. And stuff you have seen on other sites, etc.
Yes, this font is awful and the image upload process is archaic. It'll get better!
Edited by GuestAhhh, at last!
With about two years delay, but better late than never, you know.
Completely unrelated.
@SandervG - I sent you a couple of PMs, can you please have a look?
@SandervG, and to the entire team: Brave to still make this move even though money and time were spend will now feel kind of wasted.
I am curious to see the result, let me know if you need some last minute testing or advise
Wow...the forum is really cranky today. It has eaten every one of my replies and just now would not display an inserted link properly.
Cannot get fixed fast enough!!
Copy paste from @nilrog:
Anyone able to access Ultimakers forum? For the past days I always get "504 Gateway Time-out"...the only way I can access it is by using a different browser where I am not logged in. But then I can't post...and report the problem...
I mentioned it on Twitter to Ultimaker a week ago when it was still intermittent...and they only told me to be logged out, that would "solve" the access problem...
edit: Apparently I can post
Edited by GuestWhy would the share button need a flash plugin? It works after allowing, but shouldn't be required.
Any indication when the new forum is coming? Need any more testing help?
Edited by GuestI've been able to get in and post....but as always ...it's the horrible 45 second pauses/loading stuff that makes me give up and browse elsewhere.
If I go via "Forum" I also have these problems. But what still works well is to go directly from the top menu "Community" to "Top Categories", and then "General", "The art of printing", etc... So I have to avoid the direct path to "Forum".
Browsing the forum without loging-in, and then only log-in when I want to reply, also works fine, but is not handy.
If I follow a link into the forum from the outside I could get in. But if I go here directly i'm locked out...that has almost never happened before...but now it is failing 100%
Seriously @sandervg, this forum is a disaster (sorry but it's true) :(
If I go via "Forum" I also have these problems. But what still works well is to go directly from the top menu "Community" to "Top Categories", and then "General", "The art of printing", etc... So I have to avoid the direct path to "Forum".
Browsing the forum without loging-in, and then only log-in when I want to reply, also works fine, but is not handy.
Unfortunately that drop-down menu is useless...99% of the time the "popup" vanishes when you move the mouse pointer down...making it impossible to select anything...yet another catch22...
There are a number of issues that I don't seem to have.
I use google chrome on my home computer without any issues but at work I use google chrome too and there I have a blank page which I can scroll down but there is absolutely nothing there :(
It used to work on my work computer before but since a month or so ago nope.
Hi Guys,
My apologies if my reply comes in a little bit late. I have been at a show for the past week so have not been able to check the forums that often. The forum never seems to be cranky to me, it seems pretty consistent at all times. (not saying consistently satisfying ).
I am happy to say it will for sure be IPboard where we will migrate too. It is not entirely set in stone yet, since it is a work in progress (or preparation in progress to be more exact), but we are aiming on migrating mid-December. That is pretty soon luckily. 2 weeks before the date is defined we will share the final date with you. We hope to complete the migration within approx 36 hours.
Hi Guys,
My apologies if my reply comes in a little bit late. I have been at a show for the past week so have not been able to check the forums that often. The forum never seems to be cranky to me, it seems pretty consistent at all times. (not saying consistently satisfying ).
I am happy to say it will for sure be IPboard where we will migrate too. It is not entirely set in stone yet, since it is a work in progress (or preparation in progress to be more exact), but we are aiming on migrating mid-December. That is pretty soon luckily. 2 weeks before the date is defined we will share the final date with you. We hope to complete the migration within approx 36 hours.
Well...crap...forum withdrawal.......I think I'll be counting flowers on the wall or playing solitaire till dawn with a deck of 51, smoking cigarettes while watching Captain Kangaroo....so I will have something to do whilst this is in progress........
I was thinking of opening an IRC chat or something like that (or redirect to the existing one) where people can go to if they have questions in the meantime or indeed, the symptoms are becoming too strong
Would something like this be appreciated?
No tea and crumpets for me sir...I was thinking of opening an IRC chat or something like that (or redirect to the existing one) where people can go to if they have questions in the meantime or indeed, the symptoms are becoming too strong
Would something like this be appreciated?
I will wait in the cold guvnah....
Actually, I never use IRC, so that would be a no go for me, but sounds good for the other folkses. And the value of the forum for me is to peruse and follow threads that I am not involved in for a learning experience.
I can wait....ignore the shivers guvnah........I will keep tiny Tim company......
I have no idea what IRC is... I can still work with the current forum, provided I take the route "Community > Top categories > and then chose some category". Not optimal, but usable.
It is a chatroom where you can create channels and there is an Ultimaker channel. You can visit it now if you click 'Chat room' in the top bar. It is not very active tho. My suggestion was to create a link to there during the downtime of the actual migration mid-December, so people can still talk and find help.I have no idea what IRC is... I can still work with the current forum, provided I take the route "Community > Top categories > and then chose some category". Not optimal, but usable.
Recommended Posts
nilrog 103
Exactly, if you use a well respected 3rd party forum software you can be quite sure that they have covered most of the testing of basic functionality and abuse...and you can focus on customization, integration and use...instead of having to fight to keep in-house software floating
Link to post
Share on other sites