Kevparang

If you can use another file?

Yes, I have fought planes inverted and with flaps and 6 channels. I said I will lower it to 20 Pounds.

Good luck...

If you pull or push on the belts and thing you can know if it is too tight or not.

Okay, I will be one the try.

Okay.

Sure I will try.

I think you should keep it 100% and see what happens.

Since they stick so well do you think it is good for polycarbonate?

Make sure you store your PLA in a air tight container so it will not gather moister, yes, agreed, I think it is the spool or the filament.

Agreed with you @gr5 I have a RoBo3D and Monoprice MP Select, I post here on the forums, but I do use cura sometimes.

Yes, It will either be displace on the wings or one on the plane, or in the plane. Pretty hard to take off. I still need to figure electronics to hand that, we might be lowering it to 20 pounds because you need a permit to fly and it is going to be expensive. I am just doing a competition with my friends.

I cannot access RoBo3D's forums.

Hello, I heard from several users that polycarbonate and parts of 3D printing materials release toxic chemicals that are harmful for us. Is it needed for one? It yes, then where can you get one and how do you properly install it? My printer is the RoBo 3D, and like the Ultimaker it is not enclosed.

Hello, I have a RoBo3D R1+PLUS, it can only print up to 290C for hotend and 90C heated bed. Can you print regular poly carbonate?

Is tape as good as buildtak? What is the best adhesion surface that is universal?

Then just run it as admin.

My printer temperature can go to 290C hotend and 90C heated bed. It is glass.

That, I will definitely use this for my RoBo3D. is the are way to attack the part together. I heard glue is not possible.

I need to find an material that is lightweight and very strong. I also need to bee able to smooth the layers out so it is like an injection molded part, because I am designing an RC Airplane that can hold 50KG/110 LB of weight. I need to find a material that matches my requirements of this project, help with designing the plane. Anyone who is an expert in electronic for the controller or who have flown RC Airplane/Drones/Helicopters are appreciated. Aerospace Engineers are also needed. This is for an event or contest between my friends. Any help or ideas are appreciated. Other Information: The two printers I can print on are RoBo3D R1+Plus robo3d.com Build Volume 10*9*8 inches with a heated bed of 8.4*8.4 inches Monoprice MP Select Mini monoprice.com Build volume: 4.7*4.7*4.7 inches

@lRobertl I really do not want to argue with you anymore so do not argue with me. I am trying to help the community so there is not point to deny everything I say.

Your welcome!

Make sure all cura software is off your computer and then reinstall it.

You might just need to change or reattach it?

That is nice.