Jump to content

Recommended Posts

Posted · Ulti-evening June 15th

We have video's from the previous editions, and the one from yesterday will also be put online shortly. But the upload's do not contain the information shared during the Ulti-Evening and will need to be edited again. Currently they are global impressions of the evening.

If you want to see them, they can be found here.

  • Link to post
    Share on other sites

    • Replies 57
    • Created
    • Last Reply

    Top Posters In This Topic

    Posted · Ulti-evening June 15th

    Can somebody post the link to the download area to the new Cura. It was displayed but by the time I was able to record it the screensaver kicked in...

    • Like 1
    Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    Can somebody post the link to the download area to the new Cura. It was displayed but by the time I was able to record it the screensaver kicked in...

     

    yes please.

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    Can somebody post the link to the download area to the new Cura. It was displayed but by the time I was able to record it the screensaver kicked in...

     

    That must have been intended... ;) There are only beta versions up to now which are still buggy at some details. IMHO posting a link to them might not be the best thing to do... (a link to an RC might be something else...) but I think the wait for the official release will be over soon.

  • Link to post
    Share on other sites

    Posted (edited) · Ulti-evening June 15th

    @SandervG, this might be considered off topic, but as nice as the videos of previous ultievenings are, they are useless for information spreading.

    You are creating useful information by having people come and talk about things, it's being recorded, but I can't find other videos than useless promotionals.

    I can understand it takes time to edit stuff, but I haven't seen one complete vid from the last year. This is just a waste of spreadable information! Looking back at vids like this, that is much more interesting for us:

    The same goes for last ulti-evening. I couldnt come as I'm restrained to bed after a traffic accident, but I do want to know all about the new Cura! I hope there'll be more vid material than the 2 minute promo with music.

    Edited by Guest
  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    @Titus hope its not to serious and you get well soon.

    @sandervG I agree publishing full presentations would be much more usefull.

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    @titus, wow hope you are ok dude!

    Hopefully you are in your own bed, and not a hospital's bed? Take care!

    @UltiArjan, yes I agree. There have been attempts to document it better but they usually stranded due to something like 'hay', 'fork' and 'a lot'. For that reason we also asked if there were people who regularly visited had any interest in participating sharing the content.

    I am still looking at the best way to implement it, but I did receive quite some positive feedback.

    Which I am very happy about! :)

    We know the current registration doesn't add a lot of value, and on a short term we want to change this (if possible also with previous editions).

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

     

    @SandervG I had such a good time yesterday that i forgot to fill in the feedback form .... I'll be happy to still fill it in if you PM it to me... and maybe also others like @titus who could not join.

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    I'm a bit far away to attend these meetings and have previously checked the videos as I have been interested in the topics, only to find they don't hold anything useful.

    Its interesting to see glimpses of some of the creative ideas some people have come up with and would be cool to see a bit more on those 2.

    Having video really helps show some things that can't be written in text and will help people like me on the other side of the world feel a bit more involved with what's happening and also help with learning more about my printer's

    • Like 1
    Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    I completely agree with labern. I am also far away and almost given up as I have asked for informative videos of ulti evenings a long time ago.

    a comment @sander: you seem to think a lot how to involve the community (creating a new much debated forum), but a really strong asset and wealth of information the ulti evening videos are not really used. I do not understand this. moreover cutting the videos to 1 minute and music added probably takes more time than simply upload the uncut video with maybe some chapter information. e.g. I would love to see ultiarians dual extrusion mod... enough there is hope that this might change

  • Link to post
    Share on other sites

    Posted (edited) · Ulti-evening June 15th

    a bit disappointed in my dreams the horn was longer and the eyes more beautiful...

    good print though... ;)

    (minor comment the emojis are really ugly, if the leave away the frame then it would be much better)

     

    Here you are... :D

    PinkUnicorn.thumb.jpg.a7514f0450e582d3f861470accb0b30a.jpg

    'Pink unicorn' was the working title. In the meantime the pink unicorn has disappeared and the software is called 'new Cura'.

     

    Edited by Guest
  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    Oeps just reading UltiArjan post about forgetting the feedback form, same thing here. Just send the doc and I can fill it in.

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    Ok, I will send it over in a little bit.

    Thank you.

    And good to hear you had such a great time @UltiArjan!

    I suspect your Ultimaker was very popular?

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    oh gawd I have unleashed the comments leading to off topic.

    I'll fill out the form.

    /ON topic:

    How was the new Cura, what's new? Tell us some things about it :D

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

     

    @Jeex wrote a detailed report about his thoughts :)

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    @sander

    any news of uploading the last ulti-meeting. Is the video somewhere already?

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    still the Same question remains

     

    @sander

    any news of uploading the last ulti-meeting. Is the video somewhere already?

     

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    ik geloof ook niet dat we wat met mijn suggestie gaan doen?

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    I ll try a bit longer. maybe annoyance beats ignorance :-)

    Posted Jun 22, 2015 - 3:19 PM

    Edit post

    @sander

    any news of uploading the last ulti-meeting. Is the video somewhere already?

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    @korneel, Hi! Just got back from my holidays, sorry for the late reply.

    Doing a lot of reading today. Your suggestions, you mean the ulti-evening theme to be about maintenance you suggested on the first page?

    I discussed this with my colleague Marrit, whom I usually organize the events with and we are keeping it in mind for a future edition :) So don't give up hope yet :)

    And here is the video of the June edition.

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    And here is the video of the June edition.

     

    @sander: maybe a misunderstanding I meant a complete video this is just merchandising. I always talked about the whole evening or at least the presentations. still don't get it why there is no better exploitation of this great feature to get people involved and informed on the activity. a lost opportunity.

    • Like 1
    Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    If a proper full sesion video can't be uploaded/edited/translated. Could we have online video of the talks in streaming? This way more people from far away (hi from spain) could join this evenings.

  • Link to post
    Share on other sites

    Posted · Ulti-evening June 15th

    Hi @greengecko & @neotko,

    then I think there was indeed a miscommunication, we don't have a full video so I wouldn't have kept you waiting.

    Following the demand we are moving towards a more detailed and documented way to share the content from the Ulti-evenings. Yesterday was the last edition with Roos Meerman whom you may know from our story. We will document her presentation, even though it has some similarities with the info shared in the story. The wow-factor of blowing up some prints live is something we unfortunately can't share over the internet ;)

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • Help Us Improve Cura – Join the Ultimaker Research Program
        🚀 Help Shape the Future of Cura and Digital Factory – Join Our Power User Research Program!
        We’re looking for active users of Cura and Digital Factory — across professional and educational use cases — to help us improve the next generation of our tools.
        Our Power User Research Program kicks off with a quick 15-minute interview to learn about your setup and workflows. If selected, you’ll be invited into a small group of users who get early access to features and help us shape the future of 3D printing software.

        🧪 What to Expect:
        A short 15-minute kickoff interview to help us get to know you If selected, bi-monthly research sessions (15–30 minutes) where we’ll test features, review workflows, or gather feedback Occasional invites to try out early prototypes or vote on upcoming improvements
        🎁 What You’ll Get:
         
        Selected participants receive a free 1-year Studio or Classroom license Early access to new features and tools A direct voice in what we build next
        👉 Interested? Please fill out this quick form
        Your feedback helps us make Cura Cloud more powerful, more intuitive, and more aligned with how you actually print and manage your workflow.
        Thanks for being part of the community,

        — The Ultimaker Software Team
        • 0 replies
      • Cura 5.10 stable released!
        The full stable release of Cura 5.10 has arrived, and it brings support for the new Ultimaker S8, as well as new materials and profiles for previously supported UltiMaker printers. Additionally, you can now control your models in Cura using a 3D SpaceMouse and more!
          • Like
        • 18 replies
    ×
    ×
    • Create New...