+1 for clean bare glass. No cleanup and easy removal + sticking is the way to go. You just need to be fairly good at bed leveling and clean glass cleaned with alcohol occasionally like stehpan suggested will do wonders.
Even works for PET, PETG, some copoly. ABS, Nylon and the weird stuff usually requires more work though...
Recommended Posts
StephanK 30
With PLA, I don't even bother with Painters Tape. Sticks just fine on the naked glass at 60°C. No glue, no brim, no hairspray, no nothing. That's why I love PLA ;-)
(I do wipe the glass with a bit of isoprop alcohol on a paper towel before every other print, cause there's always fingerprints and lots of dust.)
Link to post
Share on other sites