OK, well this is a surprise given that I'm using the USB drive that came with the machine and the first 50 prints worked properly and I don't use that drive for anything else but 3D printing. All 50 or so of my first files were on the USB when my supplier told me to format it however the same problem occurred again later with 2 or 3 files on the drive. Of course if there's a problem with the USB drive itself then the number of files it contains is irrelevant.
I will try to print over my network more often except I keep loosing my network every other day so I'll have to solve that issue first.
Recommended Posts
Smithy 1,146
It may be related to the USB stick. Apparently, the printer can no longer access the file and read the next lines. If you want to be absolutely sure, you could also use another USB stick or print over the network.
Link to post
Share on other sites