yellowshark 153
Well I am pleased to report that I seem to have fixed those artefacts that were appearing on the print.
[media=20057][/media]
I made the following changes, which I took from the 3DVerkstan guide.
travel speed from 150 to 200
retraction distance from 4.5mm to 5.0mm
minimum travel distance from 1.5 to 1.0
minimum extrusion from 0.02 to 0
Of course, with my racing background, I should know better than to make multiple changes to the setup, so I do not know exactly what fixed it, but that is a question for another day!
Recommended Posts
Top Posters In This Topic
19
14
13
12
Popular Days
Nov 28
11
Nov 11
11
Sep 7
8
Oct 8
7
Top Posters In This Topic
LePaul 19 posts
yellowshark 14 posts
ultiarjan 13 posts
Labern 12 posts
Popular Days
Nov 28 2015
11 posts
Nov 11 2016
11 posts
Sep 7 2016
8 posts
Oct 8 2016
7 posts
Posted Images
neotko 1,417
I get it at 3djake because the make extrudr.eu doesn't make accounts with VAT and all that, good think it's that also at 45€+ they deliver free (and that's good savings).
Link to post
Share on other sites