As mommy told - hands away of sharp things... like knifes... or girlfriends... :-)
Get well soon!
As mommy told - hands away of sharp things... like knifes... or girlfriends... :-)
Get well soon!
That's unfortunate!
I take the glass off after every print and run cold water over the entire piece, then I simply tap the object with a tool that has an insulated handle (Example: Kleins) with the glass laying flat on the counter. The object usually pops right off with very little force.
That's why you keep your non-knife hand on top of the object, not on the other side of it Personally I use uhm... I have no idea what they're called in English. You use them to spread out spackle on your walls. Basically a very thin and flexible piece of metal. And then I took the dremel to it and made the edge sharp so that I can easily wedge it under the print. After I have a few millimeters of it under the print I start prying upwards to get air under the print and it'll eventually pop right off.
Gotta love the Swiss army knives...
Before my HBP upgrade I used a fixed blade that has no handle (5.11 boot knife) and is therefore very flat. It's very easy to pry off the part with that one, but usually leaves marks on the part.
With the HBP I just have to wait for the bed to cool down, then the part pops right off the plate
(Problem is, at the moment the heater doesn't work...)
it was great fun when we cleaned the hole up and got it sealed with a transparent bandage.. it was like watching little rivers of blood running from all sides.. about 5 minutes later my arm once again looked like a blood fountain...
Im thinking of desigjing and printing some arm guards for heavy work with knifes and blades... atleast good for me :smile:
Yikes! Be careful, Ian! My dragon print took a chunk out of my finger tip in a similar way, trying to remove a piece of support inside the mouth.
That said, I find that on the UM2, printing on a thin layer of glue at 60ºC, once it cools to room temp, prints will pretty much always lift right off the bed.
Those clips that hold the glass in - one of those made a small cut. Was still bleeding a little 24 hours later. Had to wear bandages for 4 days.
Seems that we have to be aware that 3D-printing is a dangerous, bloody thing - hopefully not prohibited because of life-dangering injouries... :-)
Honestly, I also use a kind of crocodile "that´s-not-a-knife" dundee fixed-blade knifes (bought for an outdoor trip in US) and gathered some cuts in my fingers during removing prints or cut away support...
I guess this is the main reason why people buy a 3D printer: because they cannot handle ordinary tools...
In this regard: Hi, my name is Dim3nsioneer and I have an Ultimaker... :wink:
EDIT: Seriously, I see it as one big advantage of the 3D printer technology: People with not too much mechanical skills can create solid things... no offense to any of you!
And it may also make those who cannot handle ordinary tools learn how to do so You come up with some design that will only work if you have a solid bar of metal somewhere, so you need to get yourself some metal and a saw. Then you need to connect something with bolts, so you go out and get that. Then your holes need threads so you go out and buy tools for that. Then you need to sand the surface for a better appearance. Then you make a lamp and have to figure out how to wire it up properly. The list goes on and on
*takes a look at the pile of parts for the CNC he started 3 years ago that still isn't done*
Ahmm... Dont know if a good idea to mention it now but I'm a graduated mechanical engineer :-)
uuups...
But I guess you know the term " if you know plastic - use steel..." :-)
So - use steel to peel of plastic
Check your title, now EVERYONE will know
(just messing with you, let me know if you want me to remove it )
Damm Dude :-)
Give me a second - have to grab my chair cause I felt down with it while laughing - that´s a great joke...
God, I love this community - nevertheless - I would be happy if you could re-change before somebody start asking "mechanical questions" bout the UM design... :-)
Sorry, still loughing....
I guess I owe you a beer if you ever come to Graz... :-)
Fine...
Hey Ian,
That's a bad wound! Is it better by now?
Ironically thought that you put this post in "The Art of Printing"..
But to be honest,
When I printed my Rammus Figure, I also had to use a sharp knife ( because I had no other tools available)
and Cut myself twice..
..within ten minutes.
The donkey never hits himself twice on the same rock!
(yet another dutch saying)
Cheers,
Lennart
thank you for asking...
all ym friends are killing me that i didnt go to the doctor or hospital when it happened.. I just cleaned the wound and bandaged it up as tight as possible.. then slept two nights with my arm propped up in the air...
but now the wound is closed uo fully and the skin is slowly growing back into the whole.
I hope I dont have too much of a bad scare... :-)
on a brighter note... because i did hurt myself badly because i was trying my best to take a large print off the glass.. im designing one or two systems that will make this little problem go away for ever :-)
Zero fighting to get big prints with glue stick off the bed anymore :-)
Will post the design maybe at the weekend when I am finished :-)
Have a good day tomorrow my friend !
Ian :-)
A sharp chisel is the way to go for me. Before, with my butcher knife, I had to work for like 10 minutas, carefully. And I always ended up messing the bed level. With a sharp chisel, it just takes 30 seconds, and it comes right off.
Recommended Posts
Dim3nsioneer 558
It's completely irresponsible of the Swiss to produce such a dangerous device! :huh:
Get well soon!
P.S.: Uhm... usually train station roofs are kind of dark red to brown, aren't they...?
Link to post
Share on other sites