Jump to content

Site internet 3dsolex


guilvine

Recommended Posts

  • Replies 175
  • Created
  • Last Reply

Top Posters In This Topic

Posted · Site internet 3dsolex

Je viens de commander et il me confirme ( par mail) un départ de ma commande lundi 09 mars. J'ai commandé en parallèle des buses notamment inox chez E3D pour le XT CF20.

A suivre

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    S'te chance !

    je ne sais pas comment il gère son truc mais la commande groupée n'est apparement toujours pas prête d'arriver sachant que la livraison devait se faire il y a bientôt un mois :-|

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    ...c'est long...

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Il faut croire que nous sommes tous pressés d'exploser notre sonde ! :)

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Le problème, c'est si on fait une commande groupée de sonde.... :blink:

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    J'ai demandé pour la commande groupée visiblement ca part aussi le 9 mars

    (Pour les sondes elles sont dispos chez makershop maintenant au cas ou :)

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Pouet pouet c'est chouette :)

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Le Solex n'est pas réputé pour sa rapidité...

     

    YAcdMOL.jpg

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Personnellement ma sonde sort nickel depuis que je l'ai changée et remise en place comme il ce doit.

    Mais je crois que je vais pas attendre avant d'acheter le kit. Je suis pressé de voir le résultat sur de petite pièce imprimée avec la buse de 0,2.

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Vous avez eu des notifications d'expédition pour vos commandes?

    Car j'ai passé commande Dimanche soir, mais j'ai pris les ports économiques.Et lundi et aujourd'hui, aucune notification d'envoi.

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    reçu ce mail aujourd'hui, ça avance, ça avance... doucement mais ça avance

    Hi!

    THANK YOU for buying from www.3dSolex.com!

    Your order is underway.

    The shipment contains Nozzles from E3D, like advertised.

    These have little holes on the side to identify them.

    Some have of you have received a 3dSolex “JET”. These are only

    identifyable by LOOKING at the hole size, sorry!

    The JETs are extremely slippery inside, you can test with the little screwdriver

    and compare with the E3Ds. Ours have a special treatment.

    Some packages have no 7mm pipes in them, because I have vacuumed all of Oslo and it is completely empty.

    HERE IS THE DEAL:

    Those who did not get 7mm pipe, will get it later.

    ALL of you will get a free 0.40mm JET when they arrive, in addition to what you already have.

    We are first movers, so sorry for the little inconveniences!

    I am currently taking orders for Teflon couplers, please check the web site.

    Good for me if I can add the pipe / Free JET to such an order.

    Our Teflon pieces are of Dupont material, very slippery inside, and cost 20E for 2 pcs.

    They ship without VAT to Europe in a small envelope.

    Ultimaker now have the “glass filled ones”, which are not as slippery but MAY last longer, at ca 19E inc VAT each. Mine are better, but are here end of March,

    -swordriff

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

     

    So sorry guys, but there are so many things that can go wrong, and a few did!

    But the collective shipment is underway now!

    I was at a conference in Sweden, and one woman came to me and said that she

    decided to buy the UM2 only after it had exchangeable nozzles.

    I think it was a great complement!

    I think (same as others do) that even 4.000€ does not buy an overall better printer.

    It is just fantastic! Only .. there are 3 or 4 know-hows, and the sense of accomplishment

    when it first worked for me!

    There are now people in many countries waiting for the stuff which is underway:

    Belgium (thank you Didier!); France, CH, Spain, Israel, New Zealand, Australia, Germany, Croatia,

    Sweden, Finland, Uk, Ireland, Netherlands, Italy (thanks Andrea!)

     

    here some stuff printed with 0.25-040mm

    M Test post 5 Min process

    Printed with different nozzle sizes

    Dragon 030mm UM2 C

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Thank you for your answer Swordriff, lets go.

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Et bienvenue sur le forum "in french" Swordriff !

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    haha! Merci beaucoup!

    Si vous voulez vous amuser avec moi (à juste titre), vous devez

    utiliser une langue non supportée par Google Translate.

    Bonne chance avec ça!

    Bonne journée!

     

    This is so funny!

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

     

    I love U Swordriff

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    :-P :oops: :mrgreen:

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Du weisch, I cha dä au öppe so schriibe dass es googeli nüt verstoht..

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    404 NOT FOUND

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Schwyzerdütsch

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    Welche Mischung!

     

  • Link to post
    Share on other sites

    Posted · Site internet 3dsolex

    j'ai reçu l'Olson Block hier ! Livraison rapide, plus rapide qu'Ultimaker , j'attend tjr la PT100B pour pouvoir monter le tout !

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...