3D Prints
1,105 files
-
very nice design fromMendellS but functionality is not so good i thing.
By domustyle
Feeder has to pull to much, result is underextrusion and less tension.
1,841 downloads
0 comments
Updated
-
0 comments
Updated
-
My mate coated in copper varnish.
By cloakfiend
copper varnish mix coating applied. look kinda like clay!!
Was very poor quality print so the thick layer masks it quite nicely. have loads more to do but experimenting on the one with most lines in them.
1,568 downloads
0 comments
Updated
-
Metal coating tests gone wrong but look interesting anyway.
By cloakfiend
Iron and Copper tests, with only one coat and no processing, i.e. painted and left no post work on the coatings. will play with washes and drybrushing later. copper looks very much like clay!! for those interested.
1,829 downloads
0 comments
Updated
-
0 comments
Updated
-
0 comments
Updated
-
CtrlV test print
By tommyph1208
Printed this to test my setup and settings
Printed on a heavily modified UMO, incl. a heated bed, E3D v6 hotend and crossflow fan
2,184 downloads
0 comments
Updated
-
0 comments
Updated
-
0 comments
Updated
-
Etau
By adrien_12
Imprimé en PLA, la résistance n'est pas terrible, je compte l'imprimé en XT ou en XT CF-20 pour plus de résistance
Mais il est fonctionnel
1,916 downloads
0 comments
Updated
-
0 comments
Submitted
-
Bottom end of UMO cable chain
By tommyph1208
This is my first print using a cross flow fan setup
Printed on a hacked UMO (E3D hotend, heated bed + others)
1,488 downloads
0 comments
Updated
-
Raptor hand by e-Nable
By ErikDeBruijn
I printed this hand for a girl in our neighbourhood. She's as cute a 6 year old as you can find. She has one hand with, and the other without fingers. We printed here a "new" hand that she can now show off to people. Immediately she could pick up and hold things. Her range of motion was still quite limited. When the physician that was treating her changed the Velcro straps, she could really use it much better.
You can go to https://e-Nable.YouMagine.com to generate customised files for this design. Also, sign up at http://enablingthefuture.org to help a hand!
2,786 downloads
0 comments
Updated
-
Roman reading slave
By nallath
Scan was made with the help of Protospace Utrecht and Ultimaker for the project "Digitale kunstroof". The statue is in the Central Museum of Utrecht
2,736 downloads
0 comments
Updated
-
ieyo bust by Braddock
By cor3ys
Another one of my favorite prints designed by Braddock, and another practice piece to learn airbrushing my prints.
2,022 downloads
0 comments
Updated
-
Custom camera loupe
By Ultimaker
This custom camera loupe is designed by @Valcrow from Redicubricks. It was a perfect fit for our camera team during an upcoming Ultimaker video!
2,997 downloads
0 comments
Updated
-
0 comments
Updated
-
0 comments
Updated
-
Bronzefill Baby Ultibot
By Labern
Normal sized Ultibot holding Bronzefill hammer with Woodfill handle and mini Ultibot.
1,612 downloads
0 comments
Updated
-
Eagle Transporter Command Module
By Curt
Here's a project that I've been working on for some years now with my good friend Darren.
Our goal is to make the most accurate plans of the Eagle Transporter from the series Space 1999 from Gerry Anderson ( also creator of Thunderbirds )
This will be the studio scale version, and when ready it will be 44" or 111.76 cm
2,185 downloads
0 comments
Updated
-
0 comments
Submitted
-
Structural Model
By TheArchitect
All printed in PLA. The blue part is a solid (20% Infill, 50mm/s) 'rigid core' to secure all horizontal forces and it forms the main load-bearing-element of the structure. The whites are only trusses, beams, girders and windbracings.
1,762 downloads
0 comments
Updated
-
Jos
By ultibrain
I scanned this little guy a while ago. Jos was printed in ColorFabb PLA, Traffic Red. It was painted with XTC-3D finisher. The image is courtesy of Els.
1,997 downloads
0 comments
Updated
-
0 comments
Updated
-
hibou en couple
By kdfab3d
Layer 0,15
Infill 20%
Vitesse impression 30 mm/s
pas de supports
1,782 downloads
0 comments
Updated