LePaul

None! I am only 1/3 of the way into that roll. I would understand if I was at the end of the roll Some suggested the ball bearing style guides on Youmagine. I had another failure last night :( I noticed the printer made a "rumbling" sound as the print head passed over the object. This caused the support material to tip and one of the supported pieces failed. I'm not sure why this happened? Edit: Wanted to mention, I do have coasting on...not sure that would cause such a problem on a large part. And again, no changes to the gcode...I have print two successfully before.

Erin and Simon are awesome!

The tube is full of filament. I haven't removed the material yet My worry is that this will happen again, should the filament kink...even though it goes directly, off the spool, in to the feeder

Well I have been doing 14-hour prints with success until the third one. 10 hours into the print it looks like I got a filament kink. I didn't have time before leaving for work to address the problem, but thought I was ask for some suggestions before Ultimaker staff are gone for the day (Darn time zones) I see filament all through the bowden, but here is what I see outside the feeder.... So disappointed...since the print just kept on going, there's no way to save this large job.

Oh geez.....now that would be funny if that's what was holding me back lol

It has to be something about insisting on brim....despite choosing Skirt and 1 line, it still greys out the model Here's how I have it set using "PLA" If I use Ultimaker -> PLA -> Metallic Silver I can't adjust the brim/skirt properly to stay on the bed (fit the bed) I suspect the 'profile' hides the skirt line count, which I need to set to 1. Despite being enabled in PLA, I can't edit it with the Ultimaker PLA

Ok guys, a laundry list of problems I am running into... 1) I have a model that fits fine with PLA. However since it is Ultimaker brand PLA, I thought I would use Ultimaker -> PLA -> Metallic Silver setting. Now the model is greyed out. Why?? 2) I do not understand for the life of me why the nozzle temp and bed temp is not a controllable variable in Cura, as it always has been. 3) When rotating a model, then clicking to turn rotation mode off, is there a way to have the default clicks go back to MOVE? Having to continue to click back on the sidebar menu is annoying I'm trying hard to like the new version and allowing the software to chose most of the default options for me (aides fill, top/bottom thickness, etc).

I can relate. Windows 7 ran aweome on my Toshiba laptop (Intel i7, 32gb RAM, 512gb Samsung Solid State Disk)...but the Intel HD 4000 chipset for graphics. But it did well. Since Windows 10 the fan runs at 100% all the time. Very annoying.

That's interesting. The few times I have bid on Ultimakers on eBay, the same buyer snipes them at 30 second remaining. At least the last time around I made him pay more

Well I'm not sure how annoying some can be....some of the ones I have seen in the past had a very hard life yet they still want what you could get a refurb (with 1 year warranty) from Fabrc8 I opted to go that route and just did the Extruder Upgrade to it. Great value right there.

I'll let him answer that

Do you have Cura 1.99 installed? If so, uninstall that Also, RENAME the folder "cura.bak" (no quotes) and trying running the program again

I'd really like to see video of these wonderful monsters being created!

@ahoeben, @Nallath emailed back with some good information I also placed your suggestion as the Best Answer, in case others run into a similar issue

..."sad R2-D2 beep"...

I have a friend whose working on a design he wants me to 3D print However the exported file he has sent me shows up very, very small in Cura He's using Blender, something I don't know a thing about. Any ideas on how I can guide him to a successful export I can use?

@Titus , ha ha...can Paul cash in his rank and points for a new Ultimaker 3 now? Some filament? Cat treats?

@Titus Well in my past projects, the drawings/files were already available. It was a matter of 3D printing or using the CNC machines to fabricate. Drawing your own stuff...ooooh. Much harder.

Oooooh. Interested!

Oh wait, I have @nallath 's email, I will send it to him

This feels like an old argument, those that are fine with their manual leveling and those that want everything as simple as possible for the customer. Either way, I am glad it is now part of this printer. Professional users will probably be a lot less technical that we are and appreciate the double-check it offers.

Correct, on my work PC I just renamed the folder and now it is working. @ahoeben , message me your email and I will send the zipped folder to you

Renamed fixed it for me.

Well I opened the electronics bay and checked everything over again....ferrite is around all the motor wires. Perhaps...that's just how an Ultimaker 2+ sounds?

How interesting I just did the Ultimaker 2+ Extruder Upgrade on my Ultimaker 2 Here's the sound mine is making on retractions I'm wondering if the ferrite clamp isn't around the extruder motor wire...? Or something else? @Sandervg ?